Device for manual dispensing with high reproducibility.
The SMART DISPENSE 06 is a professional dispensing device for manual tasks where high precision and repeat accuracy are essential.These dispensers also allow heating the dispensing nozzle. A temperature sensor inside the dispensing pen measures the cartridge temperature. Temperature insulated dispensing pens are available for common cartridge sizes in order to prevent the material from heating up during the dispensing application.
When highly viscous materials are used, the viscosity setting can be adjusted in the dispensing pen via an optionally integrated nozzle heater. Furthermore, 1K material can be processed reliably, whether in liquid or paste form. For materials with a low viscosity, the formation of drops on the dispensing needle is prevented through a manual retract vacuum.
Foot switch
Heatable pen 5ccm
Stand
Available in more sizes
Standard equipment
- Control unit SMART DISPENSE 06
- Dispensing pen (size of choice) with integrated temperature sensor, nozzle heater and connecting cable (1.5m)
- Stand for dispensing pen, foot switch, needle set (27pcs)
- Pneumatic hose (d=6mm, l=5m)
- Power supply 90–230 V AC -> 24V DC
- USB cable
- Short instruction
Materials
- Alcohol
- Silicone
- Flux
- Solder paste
- Aqueous
- Oil
- Grease
- Underfill
- Adhesive Conductive Paste
Processes
- Glob Top
- Line dispensing
- Dot dispensing
- Microdispensing
- Underfill dispensing
- Adhesive bonding
- Coating
- Preheating of the material
Technical details
| Cartridges to use: |
5, 10 ccm (3, 30 ccm on request) |
|
| Viscosity Range: |
0.1-10⁵ mPas |
|
| Nozzle heater: |
20 °C - 60 °C |
|
| Temperature steps: |
+/- 1 °C |
|
| Dot/ Line dispense settings: |
Time range: |
0.01 s - 654.00 s |
| |
Pressure range: |
0.2 bar – 6.0 bar |
| |
|
|
| Communication: |
USB 2 (Typ B) |
|
| Dimensions: |
192 x 152 x 60 mm³ |
|
| Weight: |
1.5 kg max |