New in

ESD Cardigan belongs to the WINTER collection, which is used in winter or in cold manufacturing environments for ESD clothing.

Available sizes: unisex XS - 5XL.

With long zipper and standing collar.

2 side pockets.

ESD symbol on sleeve.

Comfortable, breathable.

Not waterproof, for indoor use.

More ESD fabrics and colors available. 

IEC/TS 61340-4-9:2016 and ANSI/ESD STM2.1:2018 ESD certified products.

ESD Cardigan belongs to the WINTER collection, which is used in winter or in cold manufacturing environments for ESD clothing.

More ESD fabrics and colors available. 

Available sizes: unisex XS - 5XL

With short zipper

2 side pockets

ESD symbol on chest

ESD Cuff

Comfortable, breathable

FABRIC PROPERTIES

Static dissipative woven fabric (carbon loaded yarns in 5 mm grid)

Finish: Crease resists, workwear

Resistance from point to point (Rp): 106 - 107 Ohm

Charging time: < 2 seconds

Electrical propoerties maintained after more then 50 industrial washings according to IEC 61340-5-1 and ANSI / ESD S20.20

Complies with IEC 61340-5-1 and ANSI / ESD S20.20

Developed for industrial washing KK01

Composition: 74% Polyester, 24% Cotton, 2% Conductive fiber

Fabric Weight: 125 g/m2 TH55

Composition: 63% Polyester 33% Cotton 4% Conductive fiber

Fabric Weight: 155 g/m2 TH65

Composition: 36% Polyester 60% Cotton 4% Conductive fiber

Fabric Weight: 160 g/m2 TH96

Composition: 96% Cotton 4% Conductive fiber

Fabric Weight: 125 g/m2 CR10 Composition: 98% Polyester 2% Conductive fiber

Fabric Weight: 96 g/m2 CT35

Composition: 69% Polyester 27% Cotton 4% Conductive fiber

Fabric Weight: 130 g/m2

Static dissipative knitted fabric (with carbon yarn)

Finish: Crease resists, workwear

Resistance from point to point (Rp): 106 - 107 Ohm

Charging time: < 2 seconds

Electrical propoerties maintained after more then 40 industrial washings according to IEC/TS 61340-4-9-2016 and ANSI/ESD STM2.1-2018

Complies with IEC/TS 61340-4-9-2016 and ANSI/ESD STM2.1-2018

Developed for industrial washing

THSS

Composition: 48% Polyester 48% Cotton 4% Conductive fiber

Fabric Weight: 280 g/m2

C105 Cartridge Range will be discontinued and replaced by C115.

Nano Updating Kit allows you to use your NAS Station (A/B version) with C115 Cartridge Range.

This kit includes Cartridge Extractor for an easy and safe cartridge exchange and the set of one Nano Handle and one pair of Adjustable Nano Tweezers.

C115 cartridges are suitable for soldering and repairing very small-sized components at high precision, even under a magnifying glass.

Perfect for holding your PCB for soldering or inspection. With larger base plate to fit larger PCBs or more room for multiple interconnected PCBs during test.

INCLUDES:

4× PCBite holder

1x Large Base plate (A4)

1x Set of yellow insulation washers

1x Micro fiber cloth

The first truly hands-free probe! Makes instant measurements or long triggering sessions a breeze.

No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release.

Saves time and frustration during development, verification and repairs.

The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals.

The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool.

The dual pin header connector fits directly on a 2.54mm (0.100”) connector.

The SP10 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition.

INCLUDES:

4× PCBite holder

1× Large Base plate (A4)

4× SP10 probes with pin tipped test needles

4x Extra test needles

1x Set of yellow insulation washers

5x Dupont to dupont test wires 2x Banana to dupont test wires

1x Micro fiber cloth

A complete PCBite kit intended for connection directly to multimeter or power supply.
Kitt comes with 2psc complete SP10 probes with one red and one black probe head (positive and negative) packed together with a set of red/black banana cables.

INCLUDES:

4× PCBite holder 1x Large Base plate (A4)

2x SP10 probes with red/black probe head and pin tipped test needles

2x Banana to dupont test wires red/black

2x Extra test needles

1x Set of yellow insulation washers

1x Micro fiber cloth

It is the ideal solution for soldering processes requiring a free hand. It works with the comfortable ALE250 Auto-Feed Iron and C250 Cartridge Range.

You can easily configure parameters such as dispensed wire speed and length thanks to its newly upgraded 7-key keypad. You can also monitor the solder consumption thanks to integrated counters.

3 working modes:

In Continuous Mode solder wire is fed while the button keeps pressed. Discontinuous Mode allows the configuration of the speed and the solder wire amount that will be fed on each click. Program Mode enables the operator to configurate 3 consecutive feeding steps, obtaining a more dynamic and efficient soldering. Up to 5 programs can be set.

Solder Wire Perforation:

The solder feeder features a small blade that perforates the solder wire down to the flux core while feeding it. This perforation process allows better flux flow and outgassing, avoiding solder and flux splashing when soldering.

The included GALE10V Guide Kit makes this station compatible with Ø 1.0 mm / 0.04 in single-core solder wire. If you require a different guide-kit size, please contact us.

Furthermore, this station allows a solder reel up to 2 kg / 4.40 lb (DIN 100).

The Soldering Assistant is easy to use: select a cartridge, perform a soldering and save it as solder reference. All the soldering performed after will be compared with the solder reference, displaying information between them.

It comes with JBC Exclusive Heating System and the intelligent Sleep & Hibernation Modes.

This station is suitable for general electronic applications with a T245 General Purpose Handle, perfect for both SMD components and for jobs with high power requirements, and it works with C245 Cartridge Range.

It features all the excellence range benefits such as full control of soldering processes and remote work management.

A highly efficient, user friendly cleaner for the removal of adhesive, primer, uncured and semi-cured sealant/resin, and paste / grease.

ARW Aerowipes cleaning wipes are impregnated with a highly efficient, user friendly cleaner for the removal of adhesive, primer, uncured and semi-cured sealant/resin, and paste / grease. Spray liberally onto surface, leave for a short time and wipe clean with a lint free cloth – Engineer’s Cleaning Wipes.

Multiple applications for heavy deposits may be required. Also available in pre-saturated wipes for ease of use.

ARW has been designed for the removal of uncured and semi-cured adhesive and polysulphide sealants commonly found in the aerospace and automotive industries. Available as impregnated non-woven, lint-free wipes or liquid form for direct application, they may also be used for general cleaning and degreasing applications. They are ideal for cleaning the tools used to apply sealants and adhesives.

Removes uncured and semi-cured adhesive and polysulphide sealants; can be used for degreasing

Available in liquid and wipe form; versatile product to suit many production requirements

Wipes are non-woven and lint-free; wipe construction also aids the cleaning process

Non-flammable, water-based product; fluid will evaporate quickly leaving a residue-free finish

Approvals RoHS Compliant (2015/863/EU): Yes

Typical Properties

Density @ 20°C (g/ml): 1

pH: 5.5-6.5

Wipe Properties

Fabric Type: 41gsm non-woven

Size: ≈ 220 x 375mm

Quantity: 300 impregnated wipes per tub

Shelf Life: 12 Months

Water-based surface disinfection with a combination of state-of-the-art cleaning system and approved disinfectants. The product captures antimicrobial active substances and forms an invisible abrasion-resistant protective film on surfaces to provide protection for more than 24 hours. Initially kills more than 99.9% of bacteria, mold and viruses, including coronavirus.

The product gives an excellent shine and a clean surface.

The product is suitable for all hard surfaces.

pH value: about 4.2.

Sold in packs of 12.