It is the ideal solution for soldering processes requiring a free hand. It works with the comfortable ALE250 Auto-Feed Iron and C250 Cartridge Range.
You can easily configure parameters such as dispensed wire speed and length thanks to its newly upgraded 7-key keypad. You can also monitor the solder consumption thanks to integrated counters.
3 working modes:
In Continuous Mode solder wire is fed while the button keeps pressed. Discontinuous Mode allows the configuration of the speed and the solder wire amount that will be fed on each click. Program Mode enables the operator to configurate 3 consecutive feeding steps, obtaining a more dynamic and efficient soldering. Up to 5 programs can be set.
Solder Wire Perforation:
The solder feeder features a small blade that perforates the solder wire down to the flux core while feeding it. This perforation process allows better flux flow and outgassing, avoiding solder and flux splashing when soldering.
The included GALE10V Guide Kit makes this station compatible with Ø 1.0 mm / 0.04 in single-core solder wire. If you require a different guide-kit size, please contact us.
Furthermore, this station allows a solder reel up to 2 kg / 4.40 lb (DIN 100).
PRODUCT COMPOSITION
1 ALU Auto-Feed Control Unit
1 ALE250 Auto-Feed Iron
(cartridge and guide not included)
1 ALES Stand for ALE250 Auto-Feed Iron
1 C250403 Conical Bent Ø 1 for AL250 & AP250
1 GALE10V Guide Tube Ø1.0 mm for ALE
1 PLR195 Cartridge Extractor Plier
SPECIFICATIONS
Peak power
150 W - 23.5 V
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Operating temp. range
10 - 50 ºC / 50 - 122 ºF
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Solder wire diameter
0.4 - 1.6 mm / 0.02 - 0.06 in
Max. wire length
250 mm / 9.84 in
Max. forward speed
50 mm/s / 4.72 in/s
Max. reverse speed
50 mm/s / 4.72 in/s
Premium Stations
235 x 170 x 112 mm / 5.81 kg.