FAE is the most effective solution to avoid exposure to solder fumes. The extractor activates and operates only when soldering.
The extractor starts up only when soldering. This function not only saves power, but also extends the life span of the equipment, including the filter.
FAE1 stand has an integrated vacuum system that detects when the tool is at rest and automatically absorbs excess fumes.
FAE1 provides direct connection of up to 4 soldering or rework stations with a total of 4 tools.
It can be controlled via JBC Stations, a pedal, a robotic system or a PC.
It has 3 predefined levels of aspiration: low, medium and high. It also features a custom mode where the airflow can be set within the minimum (10%) and maximum rates (100%).
SPECIFICATIONS
SELECTABLE PARAMETERS
Aspiration flow rate
Low / Medium / High / Custom
Operation modes
Automatic (JBC Stations)
Max. flow rate
180m3/h (106 CFM)
Max. vacuum
3.2 KPa (0.46 psi)
Pre-filter
Medium dust filter M5 (EN 779)
2 Stages Main Filter
1st stage H13 filter for solid particles (EN 1822)
2nd stage Carbon filter for gases depuration
RJ12 Connector
Direct connection for 4 Stations
Pedal connector
Optional tool control
Unit
380 x 340 x 475 mm / 10.50 kg.