FAE is the most effective solution to avoid exposure to solder fumes. The extractor activates and operates only when soldering.
The extractor starts up only when soldering. This function not only saves power, but also extends the life span of the equipment, including the filter.
FAE2 stand has an integrated vacuum system that detects when the tool is at rest and automatically absorbs excess fumes.
FAE2 provides direct connection of up to 4 soldering or rework stations with a total of 8 tools.
It can be controlled via JBC Stations, a pedal, a robotic system or a PC.
It has 3 predefined levels of aspiration: low, medium and high. It also features a custom mode where the airflow can be set within the minimum (10%) and maximum rates (100%).
SPECIFICATIONS
Aspiration flow rate
Low / Medium / High / Custom
Operation modes
Automatic (JBC Stations)
Max. flow rate
290m3/h (170.7 CFM)
Max. vacuum
6.1 KPa (0.88 psi)
Pre-filter
Medium dust filter M5 (EN 779)
Compact filters
H13 particle filter (EN 1822) + activated carbon filter
RJ12 Connector
Direct connection for 4 Stations
Pedal connector
Up to 2 tools control
Operating temp. range
10 to 40 ºC / 50 to 104 ºF
Unit
560 x 320 x 590 mm / 33.60 kg.