Din webbläsare stöds ej. För bästa upplevelsen rekommenderas en nyare version eller en annan webbläsare.
För att ge dig bättre service använder vi cookies. Genom att fortsätta på sidan godkänner du vår användning av cookies.

New in

Filtrera & sorteraFiltrera & sorteraAntal artiklar 12
Antal artiklar 12
Sortera
Battery soldering station, C210
new_in_5.png
B-IRON 210
Precision under control!
This tool is suitable for soldering SMDs.

With the latest battery improvements and JBC Most Efficient Soldering System, B·iRON becomes the new generation of stations with Bluetooth connection between Handle and Console.

Up to 100 SMD soldering joints per charge.

Includes:

 B 210 Precision B·iRON Handle, is designed to perfectly lie in the operator’s hand with minimum weight.

 B 210S Stand charges the tool while resting in Hibernation Mode preventing tip oxidation.

 Console 7” with B·iRON App to control and configure the system.

 

The stand includes Quick Cartridge Exchanger, which enables a safe and easy cartridge change, Tip Cleaner with brass wool and antisplash membrane.

Fully compatible with C210 Cartridge Range.

STAND
Input voltage
100 V - 240 V 50/60 Hz
Rated current
0.35 A
USB output
5 V / 1000 mA
TOOL
Output peak power
24 W
Battery
Li-Ion 7.4V / 180mAh
Charge Time
40 minutes
Temperature range
200 - 450ºC / 390 - 840ºF
Temp accuracy
± 3% (Using reference cartridge)
Weight
35g
ESD safe
CONSOLE
Screen Size
7" (1024 x 600px)
Connectivity
Bluetooth 4.2
Battery
Lithium 2500mAh
DIMENSIONS AND WEIGHT
B.iRON
195 x 188 x 205 mm / 1.44 kg.

 

PCBite kit (large base plate)
new_in_5.png
4007

Perfect for holding your PCB for soldering or inspection. With larger base plate to fit larger PCBs or more room for multiple interconnected PCBs during test.

 

INCLUDES:

4× PCBite holder

1x Large Base plate (A4)

1x Set of yellow insulation washers

1x Micro fiber cloth

PCBite kit with 4x SP10 probes and test wires
new_in_5.png
4003

The first truly hands-free probe! Makes instant measurements or long triggering sessions a breeze.

No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release.

Saves time and frustration during development, verification and repairs.

The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals.

The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool.

The dual pin header connector fits directly on a 2.54mm (0.100”) connector.

The SP10 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition.

INCLUDES:

4× PCBite holder

1× Large Base plate (A4)

4× SP10 probes with pin tipped test needles

4x Extra test needles

1x Set of yellow insulation washers

5x Dupont to dupont test wires 2x Banana to dupont test wires

1x Micro fiber cloth

PCBite kit with 2x SP10 probes for DMM
new_in_5.png
4012

A complete PCBite kit intended for connection directly to multimeter or power supply.
Kitt comes with 2psc complete SP10 probes with one red and one black probe head (positive and negative) packed together with a set of red/black banana cables.

INCLUDES:

4× PCBite holder 1x Large Base plate (A4)

2x SP10 probes with red/black probe head and pin tipped test needles

2x Banana to dupont test wires red/black

2x Extra test needles

1x Set of yellow insulation washers

1x Micro fiber cloth

ESD Shorts
new_in_5.png
RGA-TH55-

Crease resistant, workwear in a straight style with rubberized waist with snap-fastener.

 

2 side pockets, 1 hip pocket with ESD symbol

1 side pocket on the leg

1 tool pocket on the leg

Static dissipative woven fabric (carbon loaded yarns in 5 mm grid)

Composition: 63% Polyester 33% Cotton 4% Conductive fiber

Fabric Weight: 155 g/m2

Resistance from point to point (Rp): 106 - 107 Ohm

Charging time: < 2 seconds

Electrical properties maintained after more then 50 industrial

washings according to IEC/TS 61340-4-9:2016 and ANSI/ESD

STM2.1:2018

Complies with IEC/TS 61340-4-9:2016 and ANSI/ESD STM2.1:2018

Developed for industrial washing

ESD Piké shirt womens
new_in_5.png
PGZF-PS21-

Available sizes: female XS - 5XL

Female model: Slim style

Breast pocket with ESD symbol

Hidden snap-fasteners

Collar from its own fabric: Code: SAA

Certified clothing according to the 2018 ESD standard.

Static dissipative woven fabric (carbon loaded yarns in 5 mm grid)

Finish: Crease resists, workwear

Resistance from point to point (Rp): 106 - 107 Ohm

Charging time: < 2 seconds

Electrical properties maintained after more then 40 industrial washings according to IEC/TS 61340-4-9:2016 and ANSI/ESD STM2.1:2018

Complies with IEC/TS 61340-4-9-2016 and ANSI/ESD STM2.1-2018

Developed for industrial washing

PS21
Composition: 47% Polyester 50% Cotton 3% Conductive fiber

Fabric Weight: 210 g/m2

Auto-feed Soldering Station
new_in_5.png
ALE-210VA

It is the ideal solution for soldering processes requiring a free hand. It works with the comfortable ALE250 Auto-Feed Iron and C250 Cartridge Range.

You can easily configure parameters such as dispensed wire speed and length thanks to its newly upgraded 7-key keypad. You can also monitor the solder consumption thanks to integrated counters.

3 working modes:

In Continuous Mode solder wire is fed while the button keeps pressed. Discontinuous Mode allows the configuration of the speed and the solder wire amount that will be fed on each click. Program Mode enables the operator to configurate 3 consecutive feeding steps, obtaining a more dynamic and efficient soldering. Up to 5 programs can be set.

Solder Wire Perforation:

The solder feeder features a small blade that perforates the solder wire down to the flux core while feeding it. This perforation process allows better flux flow and outgassing, avoiding solder and flux splashing when soldering.

The included GALE10V Guide Kit makes this station compatible with Ø 1.0 mm / 0.04 in single-core solder wire. If you require a different guide-kit size, please contact us.

Furthermore, this station allows a solder reel up to 2 kg / 4.40 lb (DIN 100).

1  ALU Auto-Feed Control Unit
1  ALE250 Auto-Feed Iron
(cartridge and guide not included)
1 ALES Stand for ALE250 Auto-Feed Iron
1 C250403 Conical Bent Ø 1 for AL250 & AP250
1 GALE10V Guide Tube Ø1.0 mm for ALE
1 SCH Cartridge Holder
1 P405 Pedal
1 PLR195 Cartridge Extractor Plier
Peak power
150 W - 23.5 V
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Operating temp. range
10 - 50 ºC / 50 - 122 ºF
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Solder wire diameter
0.4 - 1.6 mm / 0.02 - 0.06 in
Max. wire length
250 mm / 9.84 in
Max. forward speed
50 mm/s / 4.72 in/s
Max. reverse speed
50 mm/s / 4.72 in/s
COMPATIBLE SOLDER REEL
Weight
up to 2 kg
Diameter
max. 100 mm
Height
max. 100 mm
DIMENSIONS AND WEIGHT
Premium Stations
235 x 170 x 112 mm / 5.81 kg.
Soldering-Assistant Station 230V
CDE-2BQA
Improve your soldering quality in real time!
JBC innovates CDE station with the Soldering Assistant, the first system that measures the delivered energy during the soldering process.

The Soldering Assistant is easy to use: select a cartridge, perform a soldering and save it as solder reference. All the soldering performed after will be compared with the solder reference, displaying information between them.

Why Soldering Assistant?
It will help to improve the soldering skills of the less experts, to select the optimal temperature and cartridge and to have a more efficient and quality production

It comes with JBC Exclusive Heating System and the intelligent Sleep & Hibernation Modes.

This station is suitable for general electronic applications with a T245 General Purpose Handle, perfect for both SMD components and for jobs with high power requirements, and it works with C245 Cartridge Range.

It features all the excellence range benefits such as full control of soldering processes and remote work management.

1 CDE Soldering Station
1 T245 General Purpose Handle
   (cartridge not included)
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
CONNECTIVITY USB-B
Software PC / Firmware update
Equipotential bonding
Optional connection to EPA
ESD/EOS
ESD safe

Tip to ground resistance
<2 ohms

Tip to ground voltage
<2 mV RMS
POWER SUPPLY
Peak power
150 W - 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 122 ºF
DIMENSIONS AND WEIGHT
Compact Stations
170 x 176 x 145 mm / 2.94 kg
Solder paste S3X58-HF1100, 600gr
703900

Multi-feature Halogen-free LF Solder Paste

By adopting newly developed techniques through our expertise and experiences, has gained excellent results in all soldering features such as wetting, ICT testing, flux splattering, voiding, printing, tackiness, electrical reliability, halogen free, etc S3X58-HF1100 has applied a newly engineered flux technology in which solder particles are protected from being oxidized by an easy-to-remove protective layer and the antioxidant in the flux suppresses continued oxidation over time.

Such effects help save the amount of activator needed for oxidation prevention, as well as the activator capping technique which allows maximum activation strength when the solder is molten.

The flux formulation of S3X58-HF1100 solder paste is specifically designed to exhibit enhanced flux coagulation at the time when the solder starts to melt.Instant coagulation and evacuation of the liquified flux when the solder gets molten, brings about various benefits in soldering performance such as reduction in voiding rate and flux splattering, and improved wetting and ICT properties.

Composition: Sn 3.0Ag 0.5Cu

Particle size (μm): 20-38

Flux content (%): 11,7

Flux type: ROLO

Melting point (℃): 217-219

Viscosity (Pa.s): 190

Halide content (%): 0

 

Aerowipes
ARW300

A highly efficient, user friendly cleaner for the removal of adhesive, primer, uncured and semi-cured sealant/resin, and paste / grease.

ARW Aerowipes cleaning wipes are impregnated with a highly efficient, user friendly cleaner for the removal of adhesive, primer, uncured and semi-cured sealant/resin, and paste / grease. Spray liberally onto surface, leave for a short time and wipe clean with a lint free cloth – Engineer’s Cleaning Wipes.

Multiple applications for heavy deposits may be required. Also available in pre-saturated wipes for ease of use.

ARW has been designed for the removal of uncured and semi-cured adhesive and polysulphide sealants commonly found in the aerospace and automotive industries. Available as impregnated non-woven, lint-free wipes or liquid form for direct application, they may also be used for general cleaning and degreasing applications. They are ideal for cleaning the tools used to apply sealants and adhesives.

Removes uncured and semi-cured adhesive and polysulphide sealants; can be used for degreasing

Available in liquid and wipe form; versatile product to suit many production requirements

Wipes are non-woven and lint-free; wipe construction also aids the cleaning process

Non-flammable, water-based product; fluid will evaporate quickly leaving a residue-free finish

Approvals RoHS Compliant (2015/863/EU): Yes

Typical Properties

Density @ 20°C (g/ml): 1

pH: 5.5-6.5

Wipe Properties

Fabric Type: 41gsm non-woven

Size: ≈ 220 x 375mm

Quantity: 300 impregnated wipes per tub

Shelf Life: 12 Months

Surface desinfection +24/7 750ml Spray
new_in_5.png
17289750

Water-based surface disinfection with a combination of state-of-the-art cleaning system and approved disinfectants. The product captures antimicrobial active substances and forms an invisible abrasion-resistant protective film on surfaces to provide protection for more than 24 hours. Initially kills more than 99.9% of bacteria, mold and viruses, including coronavirus.

The product gives an excellent shine and a clean surface.

The product is suitable for all hard surfaces.

pH value: about 4.2.

Sold in packs of 12.

 

Hand desinfection 75, 150ml
new_in_5.png
17149150

LIV DES 75 is an ethanol-based hand sanitizer used to prevent and prevent the spread of microbiological infections via hands. Examples of areas of activity where Hand Disinfection 75 is suitable are human care, child care, animal care, laboratory activities, food production and other areas where hand hygiene is very important.

LIV Hand disinfection 75 is used concentrated on hands to prevent and prevent microbiological spread of infection. The product is effective against bacteria, fungi, mold and viruses (good effect against enveloped viruses, limited effect against "naked" viruses).

Avoid static electricity and make sure your hands are dry before starting the next operation. In case of contact with eyes, rinse immediately with plenty of water. Avoid getting splashes on textiles and floors. May stain.

The product complies with the European standard for disinfectants EN1500, EN1276, EN1650, EN13727, EN13624, EN14476 and EN14348.

In case of outbreak of vomiting, it is recommended that the disinfection be preceded by hand washing with soap and water.

Sold in packs of 24.

Produkten har lagts i din varukorg Visa varukorgenTill kassan