Din webbläsare stöds ej. För bästa upplevelsen rekommenderas en nyare version eller en annan webbläsare.
För att ge dig bättre service använder vi cookies. Genom att fortsätta på sidan godkänner du vår användning av cookies.

Rework stations

Filtrera & sorteraFiltrera & sorteraAntal artiklar 9
Antal artiklar 9
Sortera
EXPERT 10.6HV hybrid rework system 3300W autom. placement
DB00.1065

Semiautomatic hybrid Rework station for repairing BGA, CSP and QFP components on medium-sized circuit boards.

Rework Station with 3,300W hybrid under heater. The heating area of 275 x 245 mm² is adjustable to PCB size. Automated SMD placement process by Auto Vision Placer (AVP) incl. EASYSOLDER software package and DBL 06 control unit with six high resolution sensors inputs for thermocouples (Type K). This system is particularly suitable for mid-size and large PCBs with fine-pitch components of varying package dimensions.

Watch video

Standard equipment

  • Tool set for dispensing, placing, residual solder removal and soldering with magazine
  • Set of placement nozzles (BGA/CSP) 3 mm, 5 mm, 8 mm, 10 mm
  • Set of solder nozzles (BGA) 15 mm, 27 mm, 35 mm, 40 mm
  • Two camera lenses (BGA und CSP)
  • Two thermocouple sensors (type K)
  • Four PCB magnet holder 40,5 mm (standard)
  • Two PCB clips to install at hand rest
  • Foot switch
  • Manual
  • Intuitive software EASYSOLDER 07 with touch integration

Processes

  • Dipping
  • Paste printing
  • Solder removal
  • Soldering
  • Desoldering
  • Reballing
  • Dispensing

Technical details

Power consumption: 3,500 VA  
Power solder pen: 300 W, 35 l/min  
Power under-heating system: 600-3,000 W 6 x IR-lamps
Size under-heating system: 275 x 245 mm²  
Max. PCB size: 305 x 305 mm²  
Resolution motion system: 0,001 mm  
     
Placement accuracy: ± 0,015 mm (Flip Chip)*
  ± 0,030 mm (CSP)
  ± 0,040 mm (BGA)
  ± 0,070 mm (Maxi BGA)*
     
High resolution CMOS-camera: 5 Mio. Pixel,USB2
EXPERT 10.6 HXV 5,300 W Rework station
DB00.1066

Semiautomatic hybrid Rework station for repairing large circuit boards, such as server- or mainboards.

Rework Station with 5,300 W hybrid under-heating system. The heating area of 450 x 420 mm2 is adjustable to PCB size. Automated SMD placement process by Auto Vision Placer (AVP) incl. EASYSOLDER 07 software package and DBL 06 control unit with six high resolution sensors inputs for thermocouples (Type K).

This system is particularly suitable for large size PCBs like PCs, Laptops and Server Boards with small up to very big components.

Watch video

Standard equipment

  • Tool set for dispensing, placing, residual solder removal and soldering with magazine
  • Set of placement nozzles XL-type (BGA/CSP) 5 mm, 8 mm, 15 mm with O-Ring
  • Set of solder nozzles (BGA) 15 mm, 27 mm, 35 mm, 40 mm
  • Two camera lenses (BGA und CSP)
  • Two thermocouple sensors (type K)
  • Four PCB magnet holder 40,5 mm (standard)
  • Three PCB clips to install at hand rest
  • Foot switch
  • Manual
  • Intuitive software EASYSOLDER 07 with touch integration

Processes

  • Dipping
  • Paste printing
  • Solder removal
  • Soldering
  • Desoldering
  • Reballing
  • Dispensing
  • Multichip soldering

Technical details

Power consumption: 5,500 VA  
Power solder pen: 300 W, 35 l/min  
Power under-heating system: 1200 - 5000 W 8 x IR-lamps
Size under-heating system: 450 x 420 mm2  
Max. PCB size: 480 x 480 mm2  
Resolution motion system: 0,001 mm  
     
Placement accuracy: ± 0,015 mm (Flip Chip)*
  ± 0,030 mm (CSP)
  ± 0,040 mm (BGA)
  ± 0,070 mm (Maxi BGA)*
  ± 0,115mm (Maxi BGA XL)*
     
High resolution CMOS-camera: 5 Mio. Pixel USB2
Pressurized air: 5-8 bar, 100 l/min clean, dry air
Dimensions: 1030 x 630 mm2  
Weight: 96 kg
EXPERT 10.6 IV Adjustable 410 W under-heating system
DB00.1068

Semiautomatic hybrid Rework station with adjustable heating system for the repair of small circuit boards, such as those found in smartphones.

410 W Rework station with IR under-heating system (80 x 60 mm²) and automated SMD placement process by Auto Vision Placer (AVP) incl. software EASYSOLDER 07 and DBL 06 control unit with six high-resolution sensors inputs for thermocouples (Type K). This unit is particularly suitable for small PCBs found in smartphones and PDAs with fine-pitch components in varying package dimensions.

Watch video

Standard equipment

  • Tool set for dispensing, placing, residual solder removal and soldering with magazine
  • Set of placement nozzles (BGA/CSP) 3 mm, 5 mm, 8 mm, 10 mm
  • Set of soldering nozzles (CSP/QFN), 9 mm, 11 mm 13 mm, 16 mm
  • Set of soldering nozzles (SO) 10x15 mm², 15x25 mm²
  • Placement nozzle for manual placement of small components (0,5 mm)
  • Two camera lenses (BGA und CSP)
  • Two thermocouple sensors (type K)
  • Two PCB magnet holder 40.5 mm (standard)
  • PCB support rail 40.5 mm
  • Two PCB clips to install at hand rest
  • Foot switch
  • Manual
  • Intuitive software EASYSOLDER 07 with touch integration

Processes

  • Dipping
  • Paste printing
  • Solder removal
  • Soldering
  • Desoldering
  • Reballing
  • Dispensing

Technical details

Power consumption: 1000 VA  
Power solder pen: 300 W, 35 l/min  
Power under-heating system: 110 W, 2 x IR-lamps  
Size under-heating system: 80 x 60 mm²  
Max. PCB size: 100 x 80 mm²  
Resolution motion system: 0,001 mm  
     
Placement accuracy: ± 0,015 mm (Flip Chip)*
  ± 0,030 mm (CSP)
  ± 0,040 mm (BGA)
     
High resolution CMOS-camera: 5 Mio. Pixel, USB2
Pressurized air: 5-8 bar, 100 l/min clean, dry air
Dimensions: 865 x 460 mm²  
Weight: 70 kg

 

2-Tool DDU Desoldering Station
DDSE-2QD

This station is a complete solution to rework circuits with T245 General Purpose Handle and >DR560 Desoldering Iron.

>DDU Control Unit manages up to 2 tools simultaneously and is fully compatible with 10 different >JBC tools. It provides the best soldering quality thanks to >JBC Exclusive Heating System and, additionally, the intelligent >Sleep & Hibernation Modes help to extend life of tips.

>MSE Electric Desoldering Module generates the vacuum needed to remove the molten solder.

The station features all the >Excellence Range benefits such as station customization, full control of soldering processes and remote work management.

T245 works with >C245 Cartridge Range, the widest range of JBC. And DR560 with >C560 Tip Range that offer instant heating-up, excellent heat transfer and great durability.

This station includes two stands with a complete cleaning system - a Tip Cleaner with brass wool, as well as, splashguard and antisplash membrane to keep the work area clean and free of solder particles. Quick Cartridge Changer enables a safe, easy and quick cartridge exchange which, combined with Cartridge Holder, allows you to store up to four cartridges. Also, the station includes a >SCH Cartridge Holder to store up to 16 cartridges and tips nearby.

Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Idle temp. stability (still air)
±1.5ºC (±3ºF)
Meets and exceed IPC J-STD-001F
Temp accuracy
±3% ( using reference cartridge)
Temp adjustment
±50ºC (±90ºF) Through station menu setting
Vacuum
75% / 570 mmHg / 22.4 inHg
Flow rate
9 SLPM
CONNECTIVITY
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update Soldering Graphics management
RJ12 Connector
ESD/EOS
Tip to ground vol./ resist.
Meets and exceed
ANSI/ESD S20.20-2014 IPC J-STD-001F
POWER SUPPLY
Peak power
150 W per tool – 23.5 V
Operating temp. range
10 to 50 ºC / 50 to 122 ºF
DIMENSIONS AND WEIGHT
Premium Stations
232 x 148 x 120 mm / 9.25 kg.
4-Tool Precision Rework & Desoldering Station 230V
DMPSE-2QB

DMU Control Unit manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools.

MSE Electric Desoldering Module is indispensable for a Repairing process.

It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation Modes help to extend life of tips.

It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.

DMP works simultaneously with T210 Precision HandleT245 General Purpose HandleAM120 Adjustable Micro Tweezers and DR560 Desoldering Iron.

Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Vacuum (at 6 bar)
75% / 570 mmHg / 22.4 inHg
Flow rate (at 6 bar)
9 SLPM
CONNECTIVITY
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update.
Soldering Graphics / Profiles management.
Dino-Lite USB microscope connection. Compatible models: AM2011 and AM2111.
Robot
RS-232 remote control or Smart Fume Extractor connection
LAN
Remote control / Traceability
Equipotential bonding
Optional connection to EPA
ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
POWER SUPPLY
Peak power
160 W per tool – 23.5 V
Operating temp. range
10 to 50 ºC / 50 to 120 ºF
DIMENSIONS AND WEIGHT
Control Unit
148 x 120 x 232 mm / 4.57 kg
2T DME Stat.Elect.Pump 230V nc
DMSE-2QB

DMU Control Unit manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools.

MSE Electric Desoldering Module is indispensable for a Repairing process.

It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation Modes help to extend life of tips.

It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.

DMS works simultaneously with DR560 Desoldering Iron and T245 General Purpose Handle.

PRODUCT COMPOSITION

1 DMU 4-Tool Control Unit

1 MSE Electric Desoldering Module for DDU & DMU

1 T245 General Purpose Handle

(cartridge not included)

1 DR560 Desoldering Iron

(C560003 already inserted)

1 ADS Stand for T210 & T245 Handles

1 DRS Stand for DR560 Desoldering Iron

1 SCH Cartridge Holder

 

SPECIFICATIONS

Selectable Temperature

90 to 450 ºC / 190 to 840 ºF

Vacuum

75% / 570 mmHg / 22.4 inHg

Flow rate

9 SLPM

 

CONNECTIVITY

USB-B (rear)

Software PC / Traceability

USB-A (front)

Firmware update.

Soldering Graphics / Profiles management.

Dino-Lite USB microscope connection. Compatible models: AM2011 and AM2111.

Robot

RS-232 remote control or Smart Fume Extractor connection

LAN

Remote control / Traceability

Equipotential bonding

Optional connection to EPA

 

ESD/EOS

ESD safe

Tip to ground resistance

<2 ohms

Tip to ground voltage

<2 mV RMS

 

POWER SUPPLY

Peak power

160 W per tool – 23.5 V

Operating temp. range

10 to 50 ºC / 50 to 120 ºF

DIMENSIONS AND WEIGHT

Control Unit

148 x 120 x 232 mm / 4.57 kg

EXPERT 05.6 IXH Manual rework
HA00.5000

Software-controlled Rework station with camera for repairing medium-sized to small circuit boards.

Watch video

The Rework station with 2,000 W heating power in IR technology allows uniform heating over an area of 185 x 245 mm² and prevents mechanical stress due to temperature differences during the process. The high-resolution camera delivers fast, accurate and reproducible placement results. Even the smallest components from a size of 1 x 1 mm2 can be repaired and placed. User-friendly handling is provided by the touch-enabled EASYSOLDER 07 software. Reflow profiles with individual temperature parameters can be created, edited and saved and enable high process reliability and repeatable soldering. The Expert 05.6 IXH is a precise, cost-effective solution for the complete rework process on one unit.

 

Standard equipment

  • Two pens with magazine for soldering, residual solder removal and placing
  • Solder nozzle 7 mm, BGA soldering tool 27 x 27 mm²
  • Thermocouple sensor (Type K)
  • Two PCB magnet holder 40.5mm (standard)
  • PCB magnet holder rail 40.5mm
  • Manual
  • Intuitive software EASYSOLDER 07 with touch integration

Processes

  • Dipping
  • Paste printing
  • Solder removal
  • Soldering
  • Desoldering
  • Reballing

Technical details

Power consumption:

2,500 VA

 

Power solder pen:

300 W, 35 l/min

 

Power under-heating system:

500-2000 W

 

Size under-heating system:

185 x 245 mm²

 

Max. PCB size:

200 x 260 mm2

 

Mains:

1Phase, 230VAC, fused 16A

 

Pressurized air:

5-8 bar, 100 l/min

 

Airflow:

2-35 l/min

 
High resolution CMOS-camera:

1600 x 1200 Pixel, USB2

 
Dimensions: 660 x 360 x 390 mm3  
Weight: 35 kg  

 

Complete Rework Station 230V
RMSE-2QF

RMS Complete Rework Station is the quickest and safest solution for soldering and rework, also using hot air. It consists of stackable modules and all the necessary accessories to make your job easier.

RMS features all the Excellence Range benefits. It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation Modes help to extend tip life.

DDU Control Unit manages up to two tools simultaneously and is fully compatible with 10 different JBC tools.

MSE Electric Desoldering Module is indispensable for a complete desoldering process.

JT Hot Air Station controls the rework task using temperature and airflow profiles.

RMS works simultaneously with DR560 Desoldering IronT245 General Purpose Handle and JTT Heater Hose Set.

PRODUCT COMPOSITION

1 Hot Air Control Unit

1 DDU 2-Tool Control Unit

1 MSE Electric Desoldering Module for DDU & DMU

1 T245 General Purpose Handle

(cartridge not included)

1 DR560 Desoldering Iron

(C560003 already inserted)

1 JTT Heater Hose Set

1 ADS Stand for T210 & T245 Handles

1 DRS Stand for DR560 Desoldering Iron

1 JTS Stand for JT Heater Hose Set

1 ESHT Extractor Stand for Hot Air

1 T260 Pick & Place Handle

1 SCH Cartridge Holder

 

SPECIFICATIONS

Temperature (DDU)

90 to 450 ºC / 190 to 840 ºF

Temperature (JT)

150 to 450 ºC / 300-840 ºF

Air Flow (JT)

5 to 50 SLPM

Operation modes (JT)

Heating / Profiles / Cooling

Vacuum (MSE)

75% / 570 mmHg / 22.4 inHg

Flow rate (MSE)

9 SLPM

 

Temperature (DDU)

30% / 228 mmHg / 9 inHg

CONNECTIVITY

USB-B (rear)

Software PC / Traceability

USB-A (front)

Firmware update.

Soldering Graphics / Profiles management.

Robot

RS-232 remote control or Smart Fume Extractor connection

TC Type K (JT)

Can be used both for Control and Protection purposes.

Pedal

Optional tool control

Equipotential bonding

Optional connection to EPA

 

ESD/EOS

ESD safe

Tip to ground resistance

<2 ohms

Tip to ground voltage

<2 mV RMS

 

POWER SUPPLY

Peak Power (DDU)

150 W per tool – 23.5 V

Peak Power (JT)

700W

Operating temp. range

10 to 50 ºC / 50 to 120 ºF

DIMENSIONS AND WEIGHT

Dimensions/Net weight

See individual modules

Package

370 x 480 x 380 mm / 16.50 kg

SMD Rework System
SRWS-2SC

SRS SMD Rework System provides full control over SMD rework processes.

JT Hot Air Station controls the rework task using temperature and air flow profiles.

RWS Rework Arm supports the JTT Heater Hose Set, allowing handsfree operation.

PHSK Small Preheater Set comes with PHS Small Preheater and PSS Small PCB Support.

A variety of Protectors, Extractors and Tripods are included.

 

PRODUCT COMPOSITION

1 JT Hot Air Station

1 PHSK Small Preheater Set

1 RWS Rework Adjustable Arm for PHS

 

SPECIFICATIONS

Common Data:

Voltage

according to model:

120V / 230V / 100V

ESD safe

Package weight

19,72 kg (43.48lb)

Package dimensions

700 x 410 x 390 mm

27.56 x 16.14 x 15.35 in

 

JT data:

click here

PHSK data:

click here

RWS Data:

click here

Produkten har lagts i din varukorg Visa varukorgenTill kassan