Diverse tillbehör

Spare replacement seal for DR560

2 pieces

These accessories allows the adjustment to weight and size of any type of component.

The suction cups can be adjusted to the needles in order to make the placement of SMD to different sizes on board easier.

When you assemble the suction cup with the needle, you should avoid the needle to stick out of the lower part.

These needles are supplied with JNA High-Precision Hot Air Station and work with T260 Pick & Place

NBC260 include:

(x2) Metalic Bent needles 30G 60º Ø0.159

(x2) Metalic Bent needles 25G 60º Ø0.26

(x2) Metalic Bent needles 20G 60º Ø0.60

(x2) Suction Cups 4.3 X0.5

Straight Needles can be adjusted to T260 in order to place of SMDs of different sizes onto the board easier.

These accessories allow a faster and more comfortable desoldering job.

Helpful information:

When you assemble the suction cup with the needle, ensure that the needle does not protrude from the lower part.

The suction cups can be adjusted to the needles in order to make the placement of SMD to different sizes on board easier.

These accessories allows the adjustment to weight and size of any type of component.

When you assemble the suction cup with the needle, you should avoid the needle to stick out of the lower part.

The suction cups can be adjusted to the needles in order to make the placement of SMD to different sizes on board easier.

These accessories allows the adjustment to weight and size of any type of component.

When you assemble the suction cup with the needle, you should avoid the needle to stick out of the lower part.

Maximum Working Temperature: 250ºC

JBC Flux is a cleaning agent specifically developed for desoldering of components in repaired circuits.

Flux is used in hand soldering and the main purpose is to prepare the metal surfaces by cleaning, removing any impurities and protecting the metal surfaces during soldering.

With applicator brush.

FL is a flux brush designed to be used in the preparation of printed circuits prior to soldering an SMD component, especially flat pack integrated circuits.

All you need to do is fill the barrel with the flux. Our pens have a retractable valve in them so you have complete control of how much flux you release by gently squeezing the barrel.

FL is supplied without flux

The Seal is meant to prevent undesirable flux vapors or particles from entering inside the tool.

Its usage is highly recommended for intensive applications when soldering in exposed to FOD environments or for applications where the soldering iron works close to vertical position.

Supplied in boxes of 10 units.

Vacuum unit which allows easy positioning and removal of SMD components of different sizes.

It features 2 drive modes - a continuous mode for the removal of components with extractors/tripods and activation with pedal for precision work with the handpiece.

Various suction cup, needle, extractor and tripod sizes for ideal fitting for a wide range of components available.

PRODUCT COMPOSITION

The Rework Arm RWS supports the Hot Air Heater allowing hands-free operation. Due to an included adapter piece the Rework Arm suits for JT and TE Heaters Hose Sets.

Its Base Plate is designed to work with the PHBE Convection Preheater.

The Rework Arm comes with different articulations which are allowing height adjustment and work position adjustment to suit the operator´s needs.

The tool holder allows inclination and rotation adjustment. Both vertical axis and tool holder articulation are scaled, which is helpful in repetitive soldering tasks.

The Hose Clamp holds the Heater Hose away from the work area to keep it clear of obstacles.

PCB Support and Heater Hose Set are not included.

SPECIFICATIONS

The Rework Arm RWS supports the Hot Air Heater allowing hands-free operation. Due to an included adapter piece the Rework Arm suits for JT and TE Heaters Hose Sets.

Its Base Plate is designed to work with the PHSE IR Preheater.

The Rework Arm comes with different articulations which are allowing height adjustment and work position adjustment to suit the operator`s needs.

The tool holder allows inclination and rotation adjustment. Both vertical axis and tool holder articulation are scaled, which is helpful in repetitive soldering tasks.

The Hose Clamp holds the Heater Hose away from the work area to keep it clear of obstacles.

PCB Support and Heater Hose Set are not included.

SPECIFICATIONS

The JBC Hot Air stations use jointly protectors and tripods for a faster and more comfortable desoldering job.

Tripods allow the user to remove the desoldered component easily.

Supplied with JTSE and TESE stations.

SPECIFICATIONS

The JBC Hot Air stations use jointly protectors and tripods for a faster and more comfortable desoldering job.

Tripods allow the user to remove the desoldered component easily.

Supplied with JTSE and TESE stations.

SPECIFICATIONS