Solder fume accessories

Suction nozzle recommended for concentrated sources of pollution

Width: 100 mm

Tube and nozzle made of chromated TCP Aluminium to assure permanent conductivity and shatterproof, conductive polypropylene (PP)

Internal distribution tube in order to increase the capture efficiency

Suction nozzle recommended for concentrated sources of pollution

Width: 200 mm

Tube and nozzle made of chromated TCP Aluminium to assure permanent conductivity and shatterproof, conductive polypropylene (PP) Internal distribution tube in order to increase the capture efficiency

Suction pen recommended for concentrated sources of pollution

High efficiency as the suction pen gets close to the source without obstructing the work process

Tube made of chromated TCP Aluminium to assure permanent conductivity

Funnel of the suction pen in order to increase the capture efficiency

Length: 210 mm

Metal hood recommended when extracting gases, fumes and light dust concentrations

Diameter of hood: Ø200 mm

Hood and connection tube made of chromated TCP Aluminium for permanent conductivit

Flange of conductive polypropylene (PP)

Suction pen recommended for concentrated sources of pollution

High efficiency as the suction pen gets close to the source without obstructing the work process

Tube made of chromated TCP Aluminium to assure permanent conductivity

Funnel of the suction pen in order to increase the capture efficiency

Length: 310 mm

Flat Nozzle for extraction arm 50mm

width: 330 mm

height: 240 mm

Black, ESD

Round hood recommended for light fumes, gases and small open vessels

Diameter of hood: 385mm

Increased stability when moving the hood due to reinforced rim of the hood

Increased efficiency at an angled position Hood and flange made of conductive polypropylene (PP)

Connection tube made of chromated TCP Aluminium to assure permanent conductivity

Table bracket for mounting extraction arm on table edge.

Easy disassembly without the use of tools increases mobility.

Made of steel with a polyester powder coating on all surfaces.

• Length 156mm
• Width   95mm
• Height  16,5mm

ESD-safe extraction arm for mounting on table, Ø 50mm model with flexible spiral arm and nozzle. The advantage of Ø 50mm is that they are easy to work with.

All components RoHS-compatible.

•Working range 600 mm

•Recommended airflow 45 to 85 m³/h

•Diameter of tube: Ø50 mm

•Tubes and extractor tube made of chromated (TCP) Aluminium - surface 10 μ - in combination with a conductive flexible hose to assure permanent conductivity

•Increased options of positioning due to the flexible hose

•With funnel of the extractor tube in order to increase the capture efficiency

•Approved for ESD-areas according to IEC 61340-5-1:2016

•The extraction arms are equipped with an earth wire with a resistance of 1MΩ

•Working range 600 mm

•Recommended airflow 45 to 85 m³/h

•Diameter of tube: Ø50 mm

•Tubes and extractor tube made of anodized Aluminium - surface 10 μ – in combination with a flexible hose

•Increased options of positioning due to the flexible hose

•With funnel of the extractor tube in order to increase the capture efficiency

•Acid-proof POP® rivets

Extraction arm for mounting on table, 50mm diameter model with flexible spiral arm and nozzle and 1 joint.

All components RoHS-compatible.

•Working range 700 mm

•Recommended airflow 45 to 85 m³/h

•Diameter of tube: Ø50 mm

•Tubes and extractor tube made of chromated (TCP) Aluminium - surface 10 μ - in combination with a conductive flexible hose to assure permanent conductivity

•Increased options of positioning due to the flexible hose

•Joints made of shatterproof and conductive polypropylene (PP)

•With funnel of the extractor tube in order to increase the capture efficiency

•All O-rings maintenance free

•Integrated valve. When in an open position out of the flow path to maintain the maximum amount of flow

•All threaded stays, springs and thumbscrews made of acid-proof stainless steel (AISI 316L)

•Approved for ESD-areas according to IEC 61340-5-1:2016

•The extraction arms are equipped with an earth wire with a resistance of 1MΩ

•Dismantling of the arm without tools for cleaning

Extraction arm for mounting on table, 50mm diameter, model with flexible spiral arm and nozzle and 2 joints and integrated valve.

All components RoHS-compatible.

•Working range 900 mm

•Recommended airflow 45 to 85 m³/h

•Diameter of tube: Ø50 mm

•Tubes and extractor tube made of chromated (TCP) Aluminium - surface 10 μ - in combination with a conductive flexible hose to assure permanent conductivity

•Increased options of positioning due to the flexible hose

•Joints made of conductive shatterproof, chemical resistant polypropylene (PP)

•With funnel of the extractor tube in order to increase the capture efficiency

•All O-rings maintenance free

•Integrated valve. When in an open position out of the flow path to maintain the maximum amount of flow

•All threaded stays, springs and thumbscrews made of acid-proof stainless steel (AISI 316L)

•Approved for ESD-areas according to IEC 61340-5-1:2016

•The extraction arms are equipped with an earth wire with a resistance of 1MΩ

•Dismantling of the arm without tools for cleaning

Extraction arm for mounting on table, 50mm diameter model with 3 joints and integrated valve.

All components RoHS-compatible.

•Working range 445 - 945 mm

•Recommended airflow 45 to 85 m³/h

•Diameter of tube: Ø50 mm

•Tubes made of chromated TCP Aluminium to assure permanent conductivity

•Joints made of conductive, shatterproof and chemical resistant polypropylene (PP)

•All O-rings maintenance free and conductive

•Integrated valve. When in an open position out of the flow path to maintain the maximum amount of flow

•All threaded stays, springs and thumbscrews made of acid-proof stainless steel (AISI 316L)

•All hoods can be provided with a protective netting (accessory) to reduce the risk of extracting foreign objects

•Approved for ESD-areas according to IEC 61340-5-1:2016

•The extraction arms are equipped with an earth wire with a resistance of 1MΩ

•Dismantling of the arm without tools for cleaning

Accessory: Extractor Tube no. 5L1-5021-6

All components RoHS-compatible.

Design:

• Extraction arm for mounting on table
• Working range 445 - 1125 mm
• Recommended airflow 45 to 85 m³/h
• Diameter of tube: Ø50 mm
• Tubes made of chromated TCP Aluminium to assure permanent conductivity
• Joints made of conductive, shatterproof and chemical resistant polypropylene (PP)
• All O-rings maintenance free and conductive
• Integrated valve. When in an open position out of the flow path to maintain the maximum amount of flow
• All threaded stays, springs and thumbscrews made of acid-proof stainless steel (AISI 316L)
• All hoods can be provided with a protective netting (accessory) to reduce the risk of extracting foreign objects
• Approved for ESD-areas according to IEC 61340-5-1:2016
• The extraction arms are equipped with an earth wire with a resistance of 1MΩ
• Dismantling of the arm without tools for cleaning