Din webbläsare stöds ej. För bästa upplevelsen rekommenderas en nyare version eller en annan webbläsare.
För att ge dig bättre service använder vi cookies. Genom att fortsätta på sidan godkänner du vår användning av cookies.

Resin

Filtrera & sorteraFiltrera & sorteraAntal artiklar 15
Antal artiklar 15
Sortera
8D0FR0-C250

The GURONIC casting compounds are soft-elastic and offer excellent mechanical damping properties. They ensure reliable protection against vibration and shock, so that only extremely low loads are transferred to components and solder joints. A major advantage of the GURONIC casting compounds is their ability to repair. But also the electrical properties are to be emphasized: good dielectric, very good electrical insulation properties, high dielectric strength, minimal influence of electronic circuits as well as safe operation even at high voltages.

D0FR0 is flame retardant

Pot life at 23 °C = 2h

Cure Time

at 23 °C until fully cured = 12h

at 80 °C until solid cure = 45min

at 80 °C until fully cured = 2h

 

Mechanical Properties

soft-elastic

- excellent mechanical damping up to 1000 G

 

Electrical Properties

good dielectric

- excellent electrical insulation

- high electric breakdown strength

 

Flexibility at Low Temperatures

glass transition approx. - 80 °C

- resin stays soft at low temperatures

- excellent mechanical damping, especially at low temperatures

 

Manufacturing

- variable potlife

- convenient mixing ratio (typically 1:1 to 3:1)

- no exothermic reaction during cure

- virtually no cure shrinkage

 

Environmental

safety class free according to

91/155/EWG

- no solvents, no VOC

- no epoxy

- no isocyanate

- no silicone

 

Advantages

- reliable protection against vibration and shock

- extremely low stress on parts and soldered joints

- re-enterable, repair possible

- minimal impact on electronics

- safe to use even at high voltages

- minimal stress on parts and soldered joints at low temperatures and during temperature shocks

- protection against vibration and shock even at low temperatures

- adjustable to process conditions

- easy to manufacture

- easy potting of big volumes

- no special protective measures for production

8G40041

Casting Resin for Electronics

The GURONIC casting compounds are soft-elastic and offer excellent mechanical damping properties. They ensure reliable protection against vibration and shock, so that only extremely low loads are transferred to components and solder joints. A major advantage of the GURONIC casting compounds is their ability to repair. But also the electrical properties are to be emphasized: good dielectric, very good electrical insulation properties, high dielectric strength, minimal influence of electronic circuits as well as safe operation even at high voltages.

Pot life at 23 °C = 10min

Cure Time

at 23 °C until fully cured = 8h

at 80 °C until solid cure = 25min

at 80 °C until fully cured = 1h

 

Mechanical Properties

soft-elastic

- excellent mechanical damping up to 1000 G

 

Electrical Properties

good dielectric

- excellent electrical insulation

- high electric breakdown strength

 

Flexibility at Low Temperatures

glass transition approx. - 80 °C

- resin stays soft at low temperatures

- excellent mechanical damping, especially at low temperatures

 

Manufacturing

- variable potlife

- convenient mixing ratio (typically 1:1 to 3:1)

- no exothermic reaction during cure

- virtually no cure shrinkage

 

Environmental

safety class free according to

91/155/EWG

- no solvents, no VOC

- no epoxy

- no isocyanate

- no silicone

 

Advantages

- reliable protection against vibration and shock

- extremely low stress on parts and soldered joints

- re-enterable, repair possible

- minimal impact on electronics

- safe to use even at high voltages

- minimal stress on parts and soldered joints at low temperatures and during temperature shocks

- protection against vibration and shock even at low temperatures

- adjustable to process conditions

- easy to manufacture

- easy potting of big volumes

- no special protective measures for production

8G40077

Casting Resin for Electronics

The GURONIC casting compounds are soft-elastic and offer excellent mechanical damping properties. They ensure reliable protection against vibration and shock, so that only extremely low loads are transferred to components and solder joints. A major advantage of the GURONIC casting compounds is their ability to repair. But also the electrical properties are to be emphasized: good dielectric, very good electrical insulation properties, high dielectric strength, minimal influence of electronic circuits as well as safe operation even at high voltages.

Pot life at 23 °C = 2h

Cure Time

at 23 °C until fully cured = 72h

at 80 °C until solid cure = 3h

at 80 °C until fully cured = 8h

 

Mechanical Properties

soft-elastic

- excellent mechanical damping up to 1000 G

 

Electrical Properties

good dielectric

- excellent electrical insulation

- high electric breakdown strength

 

Flexibility at Low Temperatures

glass transition approx. - 80 °C

- resin stays soft at low temperatures

- excellent mechanical damping, especially at low temperatures

 

Manufacturing

- variable potlife

- convenient mixing ratio (typically 1:1 to 3:1)

- no exothermic reaction during cure

- virtually no cure shrinkage

 

Environmental

safety class free according to

91/155/EWG

- no solvents, no VOC

- no epoxy

- no isocyanate

- no silicone

 

Advantages

- reliable protection against vibration and shock

- extremely low stress on parts and soldered joints

- re-enterable, repair possible

- minimal impact on electronics

- safe to use even at high voltages

- minimal stress on parts and soldered joints at low temperatures and during temperature shocks

- protection against vibration and shock even at low temperatures

- adjustable to process conditions

- easy to manufacture

- easy potting of big volumes

- no special protective measures for production

8G40078

Casting Resin for Electronics

The GURONIC casting compounds are soft-elastic and offer excellent mechanical damping properties. They ensure reliable protection against vibration and shock, so that only extremely low loads are transferred to components and solder joints. A major advantage of the GURONIC casting compounds is their ability to repair. But also the electrical properties are to be emphasized: good dielectric, very good electrical insulation properties, high dielectric strength, minimal influence of electronic circuits as well as safe operation even at high voltages.

Pot life at 23 °C = 2h

Cure Time

at 23 °C until fully cured = 48h

at 80 °C until solid cure = 3h

at 80 °C until fully cured = 8h

 

Mechanical Properties

soft-elastic

- excellent mechanical damping up to 1000 G

 

Electrical Properties

good dielectric

- excellent electrical insulation

- high electric breakdown strength

 

Flexibility at Low Temperatures

glass transition approx. - 80 °C

- resin stays soft at low temperatures

- excellent mechanical damping, especially at low temperatures

 

Manufacturing

- variable potlife

- convenient mixing ratio (typically 1:1 to 3:1)

- no exothermic reaction during cure

- virtually no cure shrinkage

 

Environmental

safety class free according to

91/155/EWG

- no solvents, no VOC

- no epoxy

- no isocyanate

- no silicone

 

Advantages

- reliable protection against vibration and shock

- extremely low stress on parts and soldered joints

- re-enterable, repair possible

- minimal impact on electronics

- safe to use even at high voltages

- minimal stress on parts and soldered joints at low temperatures and during temperature shocks

- protection against vibration and shock even at low temperatures

- adjustable to process conditions

- easy to manufacture

- easy potting of big volumes

- no special protective measures for production

8G40201

Casting Resin for Electronics

 

Pot life at 23 °C = 10 min

Cure Time

at 23 °C until fully cured = 8 h

at 80 °C until solid cure = 25 min

at 80 °C until fully cured = 1h

 

Mechanical Properties

soft-elastic

- excellent mechanical damping up to 1000 G

 

Electrical Properties

good dielectric

- excellent electrical insulation

- high electric breakdown strength

 

Flexibility at Low Temperatures

glass transition approx. - 80 °C

- resin stays soft at low temperatures

- excellent mechanical damping, especially at low temperatures

 

Manufacturing

- variable potlife

- convenient mixing ratio (typically 1:1 to 3:1)

- no exothermic reaction during cure

- virtually no cure shrinkage

 

Environmental

safety class free according to

91/155/EWG

- no solvents, no VOC

- no epoxy

- no isocyanate

- no silicone

 

Advantages

- reliable protection against vibration and shock

- extremely low stress on parts and soldered joints

- re-enterable, repair possible

- minimal impact on electronics

- safe to use even at high voltages

- minimal stress on parts and soldered joints at low temperatures and during temperature shocks

- protection against vibration and shock even at low temperatures

- adjustable to process conditions

- easy to manufacture

- easy potting of big volumes

- no special protective measures for production

8REL110H/BK100

REL110H is a two-part flexible polyurethane that offers excellent water resistance and electrical insulation characteristics.

    • Low viscosity
    • Excellent resistances to seawater and water-based cleaning chemicals
    • Excellent toughness and abrasion resistance

Twinpacks are pre-weighed resin and hardener components contained in a tough flexible film, separated by a removable clip and

rail. Once the clip and rail is removed the resin and hardener is thoroughly mixed within the bag and is immediately ready for

use. Mixing will normally take ~ 2 minutes due to the viscosity; but pay special attention to the corners. Twinpacks are ideal for

small to medium production runs, prototyping and on-site or field use. The twinpack weight/volume may also be tailored to a specific size on request.

8REL110H/BK250

REL110H is a two-part flexible polyurethane that offers excellent water resistance and electrical insulation characteristics.

    • Low viscosity
    • Excellent resistances to seawater and water-based cleaning chemicals
    • Excellent toughness and abrasion resistance

Twinpacks are pre-weighed resin and hardener components contained in a tough flexible film, separated by a removable clip and rail. Once the clip and rail is removed the resin and hardener is thoroughly mixed within the bag and is immediately ready foruse. Mixing will normally take ~ 2 minutes due to the viscosity; but pay special attention to the corners. Twinpacks are ideal for small to medium production runs, prototyping and on-site or field use. The twinpack weight/volume may also be tailored to a specific size on request.

8REL225D/BK250

Robnor ResinLab EL225D is a low viscosity, semi-rigid polyurethane resin system exhibiting high electrical strength, toughness and adhesion.

    • High electrical insulating properties
    • Low viscosity
    • High adhesion and toughness
    • High chemical resistance

 

Twinpacks are pre-weighed resin and hardener components contained in a tough flexible film, separated by a removable clip and rail. Once the clip and rail is removed the resin and hardener is thoroughly mixed within the bag and is immediately ready for use. Mixing will normally take ~ 2 minutes due to the viscosity; but pay special attention to the corners. Twinpacks are ideal for small to medium production runs, prototyping and on-site or field use. The twinpack weight/volume may also be tailored to a specific size on request.

8REL241F-1/BK100

EL241F-1 is a low viscosity, semi-rigid polyurethane resin system exhibiting high electrical strength, toughness, and adhesion.

    • High electrical insulating characteristics
    • Low viscosity
    • Low water absorption and high resistance to seawater
    • Low temperature flexibility
    • Fast strength development
    •  
    • Colour:Black
    • Mixed Viscosity (mPas):2500
    • Shore Hardness:A85
    • Specific Gravity:1.18
    • Tensile Strength (mPa):10
    • Thermal Expansion (ppm/°C):75-100
    • Gel Time - 150g mass (minutes):18
    • Initial Cure (hours @ RT):24
    • Flame Retardant:No
    • Thermal Conductivity (W/mk):0.22

 

 

8REL241F-1/BK250

EL241F-1 is a low viscosity, semi-rigid polyurethane resin system exhibiting high electrical strength, toughness, and adhesion.

    • High electrical insulating characteristics
    • Low viscosity
    • Low water absorption and high resistance to seawater
    • Low temperature flexibility
    • Fast strength development
    •  
    • Colour:Black
    • Mixed Viscosity (mPas):2500
    • Shore Hardness:A85
    • Specific Gravity:1.18
    • Tensile Strength (mPa):10
    • Thermal Expansion (ppm/°C):75-100
    • Gel Time - 150g mass (minutes):18
    • Initial Cure (hours @ RT):24
    • Flame Retardant:No
    • Thermal Conductivity (W/mk):0.22
8REL297D/BK250

Polyurethanes are used in applications requiring economy, toughness, high insulation and thermal impact resistance.

They may be used as an alternative to epoxy and silicone materials. The polyurethanes can offer lower unit costs and faster production while providing excellent general performance.

It´s formulated to meet international standards for a diverse range of applications.

The polyurethanes are extremely versatile and can be modified to suit your specific applications on request.

MOQ 50PCS.

8REL583C/NC250

REL583C is a very high performance “self healing” polyurethane resin system.

    • Self-healing
    • Repairable soft gel
    • Low moisture absorption
    • High water resistance
    • Low viscosity
    • Long usable life

Twinpacks are pre-weighed resin and hardener components contained in a tough flexible film, separated by a removable clip and rail. Once the clip and rail is removed the resin and hardener is thoroughly mixed within the bag and is immediately ready foruse. Mixing will normally take ~ 2 minutes due to the viscosity; but pay special attention to the corners. Twinpacks are ideal for small to medium production runs, prototyping and on-site or field use. The twinpack weight/volume may also be tailored to a specific size on request.

 

8RPX439N/GY250

PX439N/GY is a thermally conductive flame retardant potting and encapsulating compound.

    • Low Shrinkage
    • High Adhesion
    • Approved to UL94-V0
    • Good chemical and water resistance

Twinpacks are pre-weighed resin and hardener components contained in a tough flexible film, separated by a removable clip and rail.

Once the clip and rail is removed the resin and hardener is thoroughly mixed within the bag and is immediately ready for use.

Mixing will normally take ~ 3 minutes due to the viscosity; but pay special attention to the corners.

Twinpacks are ideal for small to medium production runs, prototyping and on-site or field use.

The twinpack weight/volume may also be tailored to a specific size on request.

8RPX700K-1/BK100

PX700K-1 is a general purpose flame retardant potting and encapsulating compound.

    • Good thermal conductivity
    • High electrical insulating characteristics
    • High adhesion
    • Low shrinkage
    • Approved to UL94 V-0
    • Excellent chemical and water resistance
    •  
    • Colour:Black
    • Mixed Viscosity (mPas):6000
    • Shore Hardness:D80
    • Specific Gravity:1.64
    • Electric Strength (kV/mm):18
    • Tensile Strength (mPa):40
    • Thermal Expansion (ppm/°C):40-50
    • Gel Time - 150g mass (minutes):360
    • Initial Cure (hours @ RT):24
    • Flame Retardant:Yes – UL94 V-0
    • Thermal Conductivity (W/mk):1.0
    • Tg(°C):80-100

 

 

8RPX900D/BK100

PX900D is a low viscosity unfilled epoxy resin system.

    • Low viscosity
    • Long pot life
    • Excellent insulation characteristics
    • Excellent long-term heat resistance
    • Excellent chemical resistance

Twinpacks are pre-weighed resin and hardener components contained in a tough flexible film, separated by a removable clip and rail.

Once the clip and rail is removed the resin and hardener is thoroughly mixed within the bag and is immediately ready for use.

Mixing will normally take ~ 2 minutes due to the viscosity; but pay special attention to the corners.

Twinpacks are ideal for small to medium production runs, prototyping and on-site or field use.

The twinpack weight/volume may also be tailored to a specific size on request.

Produkten har lagts i din varukorg Visa varukorgenTill kassan