Conformal Coating

ACC 13 Synthetic peelable mask is a neutral acrylic latex material formulated as a temporary peelable solder mask designed to withstand fluxing, wave soldering and cleaning operations. It may also be used as a peelable mask during the conformal coating. Also suitable for stencilling when larger surfaces are to be protected.

Has a colour change system (pink to translucent red) to show when the material is cured

Non corrosive to copper, gold or presoldered surfaces

• Withstands molten solder - including lead free
• RoHS compliant
• Neutral, stable synthetic acrylic latex - ammonia free
• Cured mask peels readily by hand
• Min storage temperature 10°C
• Max storage temperature 30°C
• Viscosity A-Part mPas29000 mPas
• Non Corrosive
• RTV or Heat cure - Air Dry
• Coating Thinner - Water
• Solvent Resistance - Good
• Humidity Resistance - Good

Application

Apply directly from the bottle as a thin film (solder mask) or a bead (e.g. protection of connectors during conformal coating. The product may be air cured or heated to 60 or 80C. The product may be thinned with DI water if required.

Suggested thickness 20 – 30 thou / 0.020-0.030 inch / 500 – 750 micron

AFA optically clear acrylic conformal coating ideally suited for use as an LED coating or in other commercial applications to protect the PCB from the environment. AFA boasts superb properties, maintaining excellent clarity, with minimal colour temperature shift after prolonged UV exposure making it a superb choice for an LED coating application. While it also provides excellent protection in humid environments, and flexibility over a wide operating temperature range.

AFA also contains a UV trace, which allows inspection of the PCB after coating to ensure complete and even coverage and may be removed for rework using solvents such as ultrasolve.

APL Acrylic Protective Laquer is a flexible, fast drying acrylic conformal coating used for the protection of electronic circuitry. It has been formulated for professional use only and meets the requirements of a variety of international standards.

We also supply APLSP which is formulated for professional use only, supplied to the correct viscosity for selective spray applications.

Bottle with brush.

APL Acrylic Protective Laquer is a flexible, fast drying acrylic conformal coating used for the protection of electronic circuitry. It has been formulated for professional use only and meets the requirements of a variety of international standards.

We also supply APLSP which is formulated for professional use only, supplied to the correct viscosity for selective spray applications.

CCRG conformal coating remover gel is a thixotropic gel which has been specifically formulated to remove Electrolube’s solvent resistant coatings: DCA, DCB, DCR, DCRT, DCE, WBP WBPS and PUC.

The product does not contain methylene chloride.

CCRG conformal coating remover gel will not generally damage metals; however, there may be some corrosion on ferrous metals if materials are soaked for prolonged periods.
CCRG will attack several plastics and also remove component identification markings if prolonged exposure is permitted. Where possible, a compatibility test with sensitive plastics should be conducted prior to full-scale use.

A removal solvent (RRS) is also supplied, should a liquid product be required. CCRG is highly flammable so care must be taken when using this material. Refer to the SDS and TDS for additional information.

• Thixotropic gel specially formulated to remove Electrolube's solvent resistant coatings
• Allows localised removal of components
• Can be used in conjunction with RRS, Resin Removal Solvent for complete coating removal
• Water rinsable
• Does not contain methyulene chloride

DCA SCC3 Conformal Coating is a unique modified alkyd coating specifically formulated to meet the highest defence standards in both Europe and the United States. Based on a modified alkyd, it is a highly flexible coating making it ideal for small or delicate components. DCA also maintains protection through an extremely wide operating temperature range. It provides excellent chemical resistance to a wide range of chemicals and solvents such as those found in the automotive and aerospace industries making it an excellent choice for these industries.

DCA SCC3 Conformal Coating can be sprayed, dipped or brushed, containing a UV trace, which allows inspection of the PCB after coating to ensure complete and even coverage; the stronger the reflected UV light, the thicker the coating layer is. UV light in the region of 375nm should be used for inspection.

Also available as Red Opaque, Blue Transparent, and Black Opaque.

DCA SCC3 Conformal Coating is a unique modified alkyd coating specifically formulated to meet the highest defence standards in both Europe and the United States. Based on a modified alkyd, it is a highly flexible coating making it ideal for small or delicate components. DCA also maintains protection through an extremely wide operating temperature range. It provides excellent chemical resistance to a wide range of chemicals and solvents such as those found in the automotive and aerospace industries making it an excellent choice for these industries.

DCA SCC3 Conformal Coating can be sprayed, dipped or brushed, containing a UV trace, which allows inspection of the PCB after coating to ensure complete and even coverage; the stronger the reflected UV light, the thicker the coating layer is. UV light in the region of 375nm should be used for inspection.

Also available as Red Opaque, Blue Transparent, and Black Opaque.

HPA high performance acrylic conformal coating is specifically designed to meet the demanding requirements of applications such as the defence and aerospace industries. HPA high performance acrylic conformal coating is fast drying and flexible while maintaining excellent characteristics in the most challenging of environments.

HPA has a transparent finish which maintains optical clarity making it a good choice for LEDs operating in harsh environments.

HPA can be sprayed, dipped or brushed.

We also provide HPASP which has been specifically formulated to provide a viscosity between 60-100mPa s for use in selective coating and spray equipment. Choosing HPASP can improve production efficiency by eliminating the need to use thinners.

PCM peelable coating mask is a flexible, solvent resistant latex for masking components, connectors and other items during a conformal coating process.

PCM ensures that sensitive items and areas requiring further processing are not coated. It is particularly suitable for protecting areas from ingress of conformal coating, e.g. pin connectors, adjustable pots, IC sockets etc. It is also suitable as a spot mask for wave soldering applications. PCM can be applied by hand straight from the bottle or using machine. Once dry, the high film strength of PCM means that it can be peeled off again by hand without breaking or leaving residues.

PUC polyurethane conformal coating is a clear amber modified polyurethane specifically designed for the protection of electronic circuitry. It is a toughand abrasive resistant coating which has excellent mechanical and dielectric properties while maintaining flexibility to protect delicate components.

PUC polyurethane conformal coating can be sprayed, dipped or brushed. The thickness of the coating depends on the method of application (typically 25-75 microns). Temperatures of less than 16°C or relative humidity in excess of 75% are unsuitable for the application of PUC. As is the case for all solvent based conformal coatings, adequate extraction should be used.