Cleaning

ESD Mat and Table Top Cleaner is a multi-purpose neutral cleaner that is designed for production areas including static control stations. This ESD cleaner allows for effective cleaning with no alkali or ammonia.

Effective Cleaning With No Alkali or Ammonia

ACL Mat & Table Top Cleaner is a multi-purpose neutral cleaner that is designed for production areas including static control stations. It is the ideal cleaner for areas in which static-sensitive devices are assembled, tested, and handled, but can also be used in areas that require a mild but effective cleaner. This non-abrasive formula is safe to use on workstations, table tops and anti-static mats, including rubber and vinyl.

Mat & Table Top Cleaner is a non-flammable cleaner that leaves no film or streaks. It effectively removes flux residues, oily finger-marks, grease, nicotine, dirt, grime and inorganic contaminants. It also removes dirt on chair mats and other antistatic mats without degrading the surface’s antistatic properties.

Key Features:

• Eliminates unsightly film or other residue that may build up on static-sensitive areas.
• Maintains original surface resistivity of anti-static mats and workbenches.
• Cleans, rejuvenates, and extends the life of ESD mats.
• Designed for cleaning any production area including assembly, testing, and areas where sensitive electronic components are handled.
• Meets or exceeds Mil 81705 & NFPA 56A with an electrostatic decay time of .1 second according to Federal Test Method 4046.
• Contains no alkali or ammonia.
• Contains no chemical on RoHS and REACH SvHC.
• Leaves no film or streaks.

Ingredient Communication Statement

• Water (7732-18-5) Solvent.
• C9-11 Alcohols Ethoxylated (68439-46-3) Surfactant.
• 4’-tert-Butyl-2’,6’-dimethyl-3’,5’-dinitroacetophenone (81-14-1) Fragrance.
• Blue Dye.

IPA Cleaning Solvent is an approved cleaner which meets standards required by the major electronics manufacturers. The product is designed for use where the application of CFC based solvents is undesirable. IPA will clean thoroughly all electronic equipment and is safe to use on most plastics.

A very efficient anti-static foaming cleanser for surfaces prone to static dust attraction which has been specially developed for use on plastics, metal, glass and synthetic surfaces. This product is free of CFC solvents and propellants. AFC is available in 200 and 400ml 100% Ozone Friendly aerosols.

Ideal for use with anti-static cleaning wipes, preventing against static build up.

A highly efficient, user friendly cleaner for the removal of adhesive, primer, uncured and semi-cured sealant/resin, and paste / grease.

ARW Aerowipes cleaning wipes are impregnated with a highly efficient, user friendly cleaner for the removal of adhesive, primer, uncured and semi-cured sealant/resin, and paste / grease. Spray liberally onto surface, leave for a short time and wipe clean with a lint free cloth – Engineer’s Cleaning Wipes.

Multiple applications for heavy deposits may be required. Also available in pre-saturated wipes for ease of use.

ARW has been designed for the removal of uncured and semi-cured adhesive and polysulphide sealants commonly found in the aerospace and automotive industries. Available as impregnated non-woven, lint-free wipes or liquid form for direct application, they may also be used for general cleaning and degreasing applications. They are ideal for cleaning the tools used to apply sealants and adhesives.

Removes uncured and semi-cured adhesive and polysulphide sealants; can be used for degreasing

Available in liquid and wipe form; versatile product to suit many production requirements

Wipes are non-woven and lint-free; wipe construction also aids the cleaning process

Non-flammable, water-based product; fluid will evaporate quickly leaving a residue-free finish

Approvals RoHS Compliant (2015/863/EU): Yes

Typical Properties

Density @ 20°C (g/ml): 1

pH: 5.5-6.5

Wipe Properties

Fabric Type: 41gsm non-woven

Size: ≈ 220 x 375mm

Quantity: 300 impregnated wipes per tub

Shelf Life: 12 Months

Non-flammable safety solvent for use on live equipment. Fast evaporating, leaves no residues and safe on plastics. Removes oxides, grease and dirt. Ensures low contact resistance.

Fluxclene Flux Cleaning Solvent

Fluxclene flux cleaning solvant is a fast-drying solvent flux remover specially formulated for the quick and efficient removal of flux residues after solderingIt can replace ozone depleting solvents such as CFC 113 and exhibits rapid cleaning and fast evaporation rates.
The cleaning power of FLU exceeds that of traditional CFC based solvents, easily giving MIL-STD cleanliness.

• Fast drying solvent cleaner for efficient removal of flux residues after soldering
• Leaves a perfectly clean, dry surface
• Harmless to most plastics, rubbers and elastomers
• Aerosol version available with or without brush applicator

IPA Electronic Cleaning Solvent  is an internationally approved cleaner which meets standards required by the major electronics manufacturers. The product is designed for use where the application of CFC based solvents is undesirable. IPA will clean thoroughly all electronic equipment and is safe to use on most plastics. IPA is 100% Ozone Friendly.

IPA Electronic Cleaning Solvent  is an internationally approved cleaner which meets standards required by the major electronics manufacturers. The product is designed for use where the application of CFC based solvents is undesirable. IPA will clean thoroughly all electronic equipment and is safe to use on most plastics. IPA is 100% Ozone Friendly.

Electrolube’s Screen & Stencil Cleaning Wipes remove both solder pastes and adhesives with equally high efficiency. SSW100 comprise high wet strength fabric, pre-saturated with a formulated solvent based cleaner. The wipes are easily dispensed from a re-sealable tub which retains the powerful solvent saturation.

SWAS Safewash Super SWAS is ideally suited for the removal of very stubborn flux resides and no-clean fluxes, which can be extremely difficult to remove. SWAS will remove them to military cleanliness standards. It is ready to use and also contains a corrosion inhibitor for use with sensitive metals. It also has a lower odour than the other Safewash variants and is easy to rinse. SWAS is part of the Electrolube Safewash range; water-based, non-flammable, biodegradable solvent blends designed to clean to within military cleanliness standards, (ANSI-J001B/IPC TM-650).

SWAS Safewash Super SWAS is ideally suited for the removal of very stubborn flux resides and no-clean fluxes, which can be extremely difficult to remove. SWAS will remove them to military cleanliness standards. It is ready to use and also contains a corrosion inhibitor for use with sensitive metals. It also has a lower odour than the other Safewash variants and is easy to rinse. SWAS is part of the Electrolube Safewash range; water-based, non-flammable, biodegradable solvent blends designed to clean to within military cleanliness standards, (ANSI-J001B/IPC TM-650).

Ultrasolve Cleaning Solvent is a fast-drying solvent specially formulated for the quick and efficient cleaning of electrical equipment. It replaces CFC solvents such as 113 trichloroethane due to rapid cleaning and fast evaporation rates. Ultrasolve is 100% Ozone Friendly. A full range of cleaning solvents are available from Electrolube, including fast and slow drying solvents and water based products.

Ultrasolve Cleaning Solvent is a fast-drying solvent specially formulated for the quick and efficient cleaning of electrical equipment. It replaces CFC solvents such as 113 trichloroethane due to rapid cleaning and fast evaporation rates. Ultrasolve is 100% Ozone Friendly. A full range of cleaning solvents are available from Electrolube, including fast and slow drying solvents and water based products.

Ultrasolve Cleaning Solvent is a fast-drying solvent specially formulated for the quick and efficient cleaning of electrical equipment. It replaces CFC solvents such as 113 trichloroethane due to rapid cleaning and fast evaporation rates. Ultrasolve is 100% Ozone Friendly. A full range of cleaning solvents are available from Electrolube, including fast and slow drying solvents and water based products.

This product is being discontinued. Limited supply!