New in

Save time and optimize workflow.

PSS enables quick, precise PCB changes, ensuring proper positioning for repetitive soldering tasks.

This support adapts perfectly to any type of PCB up to 130 x 130 mm / 5 x 5 in by means of its many adjustable elements.

Features:

• Horizontal-axis swivel

Turn the PCB holder 180º upside down and choose among 4 different angular positions 25º, 35º, 45º and 55º.

• Vertical-axis swivel

Allows positioning the PCB at any angle. It can be rotated in horizontal and inclined position.

• It provides up to 3 heights.

When combined with PHSE Preheater its built-in slots ensure precise board-preheater alignment to always heat the same area.

SPECIFICATIONS

Precision under control!

B·IRON 500 performs up to 500 SMD soldering joints per charge.

Specially designed for electronic production and intensive works.

Included:

• B·IRON 500 TOOL Precision Handle fully compatible with C210 Cartridge Range. It also has a power safe mode that can be activated by putting on the cap.

• Charging Base charges the tool automatically when placed in the Tool Holder.

It also features Quick Cartridge Exchanger, which enables a safe and easy cartridge change, Tip Cleaner with Brass Wool and Antisplash Membrane.

• PDS Portable Display 7" with B·IRON App to configure and control the system.

The Soldering Assistant is easy to use: select a cartridge, perform a soldering and save it as solder reference. All the soldering performed after will be compared with the solder reference, displaying information between them.

It comes with JBC Exclusive Heating System and the intelligent Sleep & Hibernation Modes.

This station is suitable for general electronic applications with a T245 General Purpose Handle, perfect for both SMD components and for jobs with high power requirements, and it works with C245 Cartridge Range.

It features all the excellence range benefits such as full control of soldering processes and remote work management.

Perfect for holding your PCB for soldering or inspection. With larger base plate to fit larger PCBs or more room for multiple interconnected PCBs during test.

INCLUDES:

4× PCBite holder

1x Large Base plate (A4)

1x Set of yellow insulation washers

1x Micro fiber cloth

The first truly hands-free probe! Makes instant measurements or long triggering sessions a breeze.

No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release.

Saves time and frustration during development, verification and repairs.

The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals.

The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool.

The dual pin header connector fits directly on a 2.54mm (0.100”) connector.

The SP10 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition.

INCLUDES:

4× PCBite holder

1× Large Base plate (A4)

4× SP10 probes with pin tipped test needles

4x Extra test needles

1x Set of yellow insulation washers

5x Dupont to dupont test wires 2x Banana to dupont test wires

1x Micro fiber cloth

A complete PCBite kit intended for connection directly to multimeter or power supply.
Kitt comes with 2psc complete SP10 probes with one red and one black probe head (positive and negative) packed together with a set of red/black banana cables.

INCLUDES:

4× PCBite holder 1x Large Base plate (A4)

2x SP10 probes with red/black probe head and pin tipped test needles

2x Banana to dupont test wires red/black

2x Extra test needles

1x Set of yellow insulation washers

1x Micro fiber cloth

Available sizes: unisex XS - 5XL

Round neck

Without any pocket

ESD symbol on sleeve

Certified clothing according to the 2018 ESD standard. 

Static dissipative woven fabric (carbon loaded yarns in 5 mm grid)

Finish: Crease resists, workwear

Resistance from point to point (Rp): 106 - 107 Ohm

Charging time: < 2 seconds ā Electrical properties maintained after more then 40 industrial washings according to IEC/TS 61340-4-9:2016 and ANSI/ESD STM2.1:2018

Complies with IEC/TS 61340-4-9-2016 and ANSI/ESD STM2.1-2018

Developed for industrial washing

PS21
Composition: 47% Polyester 50% Cotton 3% Conductive fiber

Fabric Weight: 210 g/m2

Crease resistant, workwear in a straight style with rubberized waist with snap-fastener.

2 side pockets, 1 hip pocket with ESD symbol

1 side pocket on the leg

1 tool pocket on the leg

Static dissipative woven fabric (carbon loaded yarns in 5 mm grid)

Composition: 63% Polyester 33% Cotton 4% Conductive fiber

Fabric Weight: 155 g/m2

Resistance from point to point (Rp): 106 - 107 Ohm

Charging time: < 2 seconds

Electrical properties maintained after more then 50 industrial

washings according to IEC/TS 61340-4-9:2016 and ANSI/ESD

STM2.1:2018

Complies with IEC/TS 61340-4-9:2016 and ANSI/ESD STM2.1:2018

Developed for industrial washing

A highly efficient, user friendly cleaner for the removal of adhesive, primer, uncured and semi-cured sealant/resin, and paste / grease.

ARW Aerowipes cleaning wipes are impregnated with a highly efficient, user friendly cleaner for the removal of adhesive, primer, uncured and semi-cured sealant/resin, and paste / grease. Spray liberally onto surface, leave for a short time and wipe clean with a lint free cloth – Engineer’s Cleaning Wipes.

Multiple applications for heavy deposits may be required. Also available in pre-saturated wipes for ease of use.

ARW has been designed for the removal of uncured and semi-cured adhesive and polysulphide sealants commonly found in the aerospace and automotive industries. Available as impregnated non-woven, lint-free wipes or liquid form for direct application, they may also be used for general cleaning and degreasing applications. They are ideal for cleaning the tools used to apply sealants and adhesives.

Removes uncured and semi-cured adhesive and polysulphide sealants; can be used for degreasing

Available in liquid and wipe form; versatile product to suit many production requirements

Wipes are non-woven and lint-free; wipe construction also aids the cleaning process

Non-flammable, water-based product; fluid will evaporate quickly leaving a residue-free finish

Approvals RoHS Compliant (2015/863/EU): Yes

Typical Properties

Density @ 20°C (g/ml): 1

pH: 5.5-6.5

Wipe Properties

Fabric Type: 41gsm non-woven

Size: ≈ 220 x 375mm

Quantity: 300 impregnated wipes per tub

Shelf Life: 12 Months

Water-based surface disinfection with a combination of state-of-the-art cleaning system and approved disinfectants. The product captures antimicrobial active substances and forms an invisible abrasion-resistant protective film on surfaces to provide protection for more than 24 hours. Initially kills more than 99.9% of bacteria, mold and viruses, including coronavirus.

The product gives an excellent shine and a clean surface.

The product is suitable for all hard surfaces.

pH value: about 4.2.

Sold in packs of 12.