Your browser is not supported. For the best experience, a newer version or another browser is recommended.
In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.

Earth bonding products

Our range of ESD cords provide a strong connection to ground and are suitable for use with most antistatic wrist straps. ESD cords are the first line of defense against potential ESD damage.

Filter & sortFilter & sortNumber of articles 18
Number of articles 18
Sort
Item no.
Display per page
ESD anti-allergy adjustable blue fabric wrist-strap, 10mm stud
1510-0002

Premium high comfort, fully adjustable blue fabric wrist-strap with silver conductive fibres.
This wrist-strap is woven and has a curved buckle for added comfort. Double thickness material ensures outer layer insulation for complete operator safety.
Supplied with a 10mm stud as standard.

ESD Adjustable Stainless Steel Wrist-Strap, 10mm stud, black
1510-0003

High-quality adjustable stainless steel wrist strap designed to be worn in an ESD working area.
Supplied with 10mm stud for grounding, cord connection.

Available in blue or black.

Coil cord, 1,8 m, 10mm to10mm stud
1510-0004

Best selling premium coil cords for workstation grounding.

The coil cords are durable, of high-quality and available in a range of lengths to suit your requirements. 

Coil cord, 1,8 m, 10mm snap to jack-plug/crocodile clip
1510-0007

Best selling premium coil cords for workstation grounding.

The coil cords are durable, of high-quality and available in a range of lengths to suit your requirements.   

ESD Grounding Heel Strap 1pc
1520-0001

ESD Snap Lock Heel Grounder 1Meg

The Antistatic heel Grounder consists of conductive rubber (double layer), Elastic Band(snap lock) and conductive ribbon.

The resistance can be put outside or inside of the rubber.

Snap lock.

Waterproof

(Heel pads are to be worn in pairs.)

ESD Grounding toe strap, 1pc
1520-0002

ESD Toe Grounder for Women1Meg

The Antistatic heel Grounder consists of conductive rubber (double layer), Elastic Band(snap lock) and conductive ribbon.

The resistance can be put outside or inside of the rubber.

Snap lock

Waterproof

(Heel pads are to be worn in pairs.)

Disposable Shoe Strap, 100pcs
1520-0003

Disposable heel pads allow quick dissipation of electrical charges without resistance during occasional passages in the EPA zone.

Disposable heel pads are to be worn in pairs.

30cm

1520-0005

Automatic dispenser for overshoe.

Capacity 40-50 pairs.

Specially developed for EPA and clean rooms.

Application within seconds.

 

Supplied without the overshoes.

ESD Dissipative Overshoes 50pairs
1520-0006

Material: Polypropylene shoe covers are made of 100% spun-bond

polypropylene. This non-woven fabric helps to filter particles for

contamination control in critical environments from the shoe. The

shoe cover comes with dissipative strip that is intended for static

sensitive applications.

 

Weight: 40 g/m²

Surface resistance: Dissipative black ribbon < 109 Ω

Compliance: IEC 61340-5-1

Not suitable for dispenser 30-551-5000

 

Packaging: 50 pairs

Straight grounding cord, 3m, 10mm to 10mm stud
1540-0001

Straight grounding cords are durable, high-quality and are 3 meters (10ft) long as standard. Standard colour is blue (other colours available on request). Also available with 7mm or 4mm snap / stud sizes.

Straight grounding cord, 3m, 10mm snap to jack-plug/crocodile clip
1540-0002

Premium straight grounding cords are durable, high-quality and are 3 meters long as standard. Standard colour is blue (other colours available on request).
All premium products can also be supplied with 7mm or 4mm snap / stud sizes.

Straight grounding cord, 3m, 10mm snap to eyelet
1540-0003

Premium straight grounding cords are durable, high-quality and are 3 meters (10ft) long as standard. Standard colour is blue (other colours available on request). All premium products can also be supplied with 7mm or 4mm snap / stud sizes.

Crocodile clip, heavy duty, 10mm stud
1599-0001

These ESD grounding accessories monitor/eliminate the build-up of static discharge that may pose a risk to static sensitive components or devices. They can be added to bonding plugs or snaps for a secure connection.

Adaptor snap
1599-0002

These ESD grounding accessories monitor/eliminate the build-up of static discharge that may pose a risk to static sensitive components or devices. They can be added to bonding plugs or snaps for a secure connection.

Dispenser for Disposable Heel Grounder, 315x200x55mm
1599-0009

Dispenser for disposable heels straps of 100 pairs.
The disposable heel strap dispenser can be wall mounted.

(Heel straps not included)

Wrist-Strap Test Station WST 2
1710-0005

Wall mounted unit for checking the continuity of fitted wrist-strap and cord. The WST2 unit is supplied with the WST1 meter, wall mounting board, 6 inch cord (0 meg ohm) and 9V battery. Manufactured in the United Kingdom.

The standard Wrist Strap Tester has a single test range 0.75 meg-ohm to 35 meg-ohm.  (Other resistance ranges available on request).
The instrument has a green light for pass (i.e. resistance between 0.75 meg-ohm and 35 meg-ohm) and 2 red lights which indicate either High resistance fail or Low resistance fail.
A buzzer sounds in any fail situation.

Full instruction guide and calibration certificate supplied with each unit.

 

  • All test instruments are manufactured to the very highest quality, allowing qualification to council directives. 89/336/EEC.
  • Custom Logos, backboards, printing and other instrument colours available on request.
  • Each unit is supplied with 1 year calibration certificate.
  • Very easy to use.
  • All items are CE approved.
  • Supplied with WST1 meter.
  • Full calibration service available.
Dual ESD Footwear/ Wrist-Strap Tester
1710-0006

Wall mounted unit for checking the continuity of fitted wrist-straps and cords, fitted shoes, heel straps or toe grounders.

Dual ESD Footwear and Wrist Strap Tester from Bondline gives the user the ability to not only test their wrist strap but also their footwear (both feet) at the same time.
The tester quickly measures the resistance of fitted wrist straps, and with the footwear plate fitted, heel straps and ESD shoes with ease. 

The ESD wrist-strap test unit is wall mounted and is sold as a complete set with a calibration certificate. Three test settings. 

Supplied with:

  • Test unit
  • Wall mounting board/plate
  • 6 inch (150mm) cord (0 meg-ohm)
  • 6 ft (1.8m) cord (0 meg-ohm)
  • Dual footplate
  • 9V battery

Key Features

  • Wrist Strap Test between 750 Kilohms – 35 Megohms.
  • Footwear Test between 100 Kilohms – 100 Megohms.
  • Alternative test limits on request.
  • Weight of tester: 500 grams.
  • Dimensions of tester: 91 x 31.8 x 146 mm.
  • Power supply: 9 volt PP3 alkaline battery.
  • Wall plate material: Foamex.
  • Dual footplate material: Foamex and Stainless Steel.
  • Various wrist strap connections: 10mm stud and 4mm banana socket.
  • Included in the kit: Test unit, wall mounting board, 6 inch (150mm) cord (0 meg-ohm), 6 ft (1.8m) cord (0 meg-ohm), dual footplate, 9V battery.
  • Sold as a complete set with calibration certificate.
  • Calibration required annually.
  • Full calibration service available with Bondline.
  • Customisable: Private labelling, colours, logos, backboards and specific resistance ranges can be made on request.
  • Manufactured to the very highest quality allowing qualification to council directives 89/336/EEC.
  • ESD Susceptibility Symbol printed on backboard.
  • Compliant to IEC 61340-5-1, CE, UKCA, RoHS and REACH standards.
  • CE approved.

Manufactured in the UK.

Field meter SL7100 Digital
1710-0009

This handheld, portable, digital electrostatic field meter with a rotating chopper detects and accurately measures electrostatic fields. An excellent, all-round field meter device.
Supplied with a 9V battery, grounding cable and a carrying bag.

This device measures fields, potentials and discharge time. Automatic field to voltage conversion (V/m -> V) according to the selected distance. Very stable zero adjust.

The 9V battery is rechargeable. The field meter’s display is LCD and has two rows.

Key Features:

  • Device is handheld and portable.
  • Rotating chopper.
  • Conductive outer case.
  • ESD identification symbol featured in lower left-hand corner of device.
  • Detects and accurately measures electrostatic fields.
  • Very stable zero adjust.
  • 1 year limited warranty.
  • Recommended calibration interval: 2 years.
  • User manual supplied with the product, available on request.
  • Field meter is supplied with: 9V battery, grounding cable and a carrying bag.
  • All items are CE approved.
  • RoHS and REACH compliant.
  • Compliant according to IEC-61340-1-5 International Standard.

 

All test instruments are manufactured to the very highest quality allowing qualification to council directives 89/336/EEC.

Contact us for more information.

The product has been added to your shopping cart Show shopping cartCheckout