Your browser is not supported. For the best experience, a newer version or another browser is recommended.
In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.

Fume extractors

Filter & sortFilter & sortNumber of articles 6
Number of articles 6
Sort
Item no.
Fume Extractor for AP130
F1204
The fume extractor for AP130 and AP250

 

solder feed irons is an easy & safe solution

to suck the fume generated at the

solder joint.

 

It is supplied with all necessary pieces

to adapt perfectly to the soldering iron.

 

A bridle collects both cables for more manageability.

 

It is required a suction pump and filter.

 

Net weight 0,03kg
Fume Extractor for T245 D.6
F3435
The fume extractor for T245 handpiece is an easy & safe solution to suck the fume generated at the solder joint.

 

It is designed to slide over the collar in order to adjust itself to the cartridges length.

 

Although this model is 6 mm diameter there is also available a fume extractor about 4 mm diameter for the same handpiece.

 

It is supplied with a cleaning accessory and all necessary pieces to make it more manageable.

 

It is required a suction pump and filter.

 

SPECIFICATIONS
Net Weight 0,10 kg
 
Fume Extractor for T245 D.4
F3449
The fume extractor for T245 handpiece is an easy & safe solution to suck the fume generated at the solder joint.

 

It is designed to slide over the collar in order to adjust itself to the cartridges length.

 

Although this model is 4 mm diameter there is also available a fume extractor about 6 mm diameter for the same handpiece.

 

It is supplied with a cleaning accessory and all necessary pieces to make it more manageable.

 

It is required a suction pump and filter.

Fume Extractor for T210 D.4
F3450
The fume extractor for T210 microhandpiece is an easy & safe solution to suck the fume generated at the solder joint.

 

It is designed to slide over the collar in order to adjust itself to the cartridges length.

 

It is supplied with a cleaning accessory and all necessary pieces to make it more manageable.

 

It is required a suction pump and filter.

 

Fume Extractor for AL
F4468
The fume extractor for AL250 is an easy & safe solution to suck the fume generated at the solder joint.

 

It is supplied with all necessary pieces to adapt it perfectly to the soldering iron.

 

A bridle collects both cables for more manageability.

 

It is required a suction pump and filter.

 

Fume Extractor for T245 D.6 3M
F6457

The fume extractor for T470 handpiece is an easy & safe solution to suck the fume generated at the solder joint.

 

It is designed to slide over the collar in order to adjust itself to the cartridges length.

 

It is supplied with a cleaning accessory and all necessary pieces to make it more manageable.

 

It is required a suction pump and filter.

The product has been added to your shopping cart Show shopping cartCheckout