New in

It is ideal for tinning wires quickly and safely as well as

for soldering and desoldering through-hole multipin components.

Additionally, it offers all the advantages of the JBC Most Efficient Soldering System.

It includes:

• HDE Heavy Duty Control Unit: Its new power supply (SMPS) ensures high efficiency and increased performance for soldering applications that require a large amount of heat.

• CTS Solder Pot Stand: Equipped with a residue tray and protective screen, it prevents accidental tipping and allows you to work safely.

• CHB Converter: It allows you to connect the handle to the control unit directly.

• T470 Heavy Duty Handle: Compatible with C470SP01 (18 x 15 mm) and C470SP42 (40 x 40 mm). The long-lasting solder pot will resist the corrosiveness of lead-free solder alloys.

• Cartridge C470SP42 (40 x 40 mm) included.

HDEK Heavy Duty Rework Station has been designed to reduce the soldering time in applications that require a large amount of heatspan.

Some examples of applications are: coaxial cable shields soldering in telecommunication antennas, soldering of large copper conductors in medical imaging scanners, battery terminals, large-size capacitors, etc.

This station is supplied with 2 HDEU Control Units, the most powerful soldering unit in the JBC range, and with HT470 HD Thermal Tweezers which use C470 Cartridge Range.

The control unit provides the best soldering quality thanks to JBC Most Efficient Soldering System and, additionally, the intelligent Sleep & Hibernation Modes help to extend life of tips. It also allows direct connection with JBC Fume Extractors.

Aditionally, includes SCH Cartridge Holder to store up to 16 cartridges and tips nearby.

The 5L-FS400 fume extractor is an essential tool for any soldering workspace, designed to ensure a clean and healthy working environment.
During soldering, toxic fumes, such as lead and tin vapors, are released, which can be harmful when inhaled.
The 5L-FS400 effectively filters out these substances, protecting both the user and the surrounding area.

Equipped with an advanced three-stage filtration system, it first captures dust and larger particles with a pre-filter, absorbs microparticles with
a combined filter, and binds harmful gases with an activated carbon filter.

This unit operates quietly (<48 dBA), making it ideal for workplaces where low noise levels are required. Its optical and acoustic filter change
indicator ensures that the system is always functioning at its best.

The extractor is designed to efficiently remove solder fumes from up to four workstations simultaneously. A powerful axial fan quickly draws in
harmful vapors, preventing them from spreading into the air and causing skin and respiratory irritation.
It is particularly useful for soldering circuit boards, tinning, repairing electrical appliances, and metalworking.

Matronic's FS400 is a mobile filter system for the elimination of particles and gases in contaminated process air from soldering, gluing, cleaning,
pressure processes, etc.
With the 5L-FS400 from Matronics, you can focus on your work, confident that you are breathing clean air and actively protecting yourself from
potential health issues caused by solder fumes.

Also available with filters adapted for clean rooms. 

The machine has inputs for up to 4 arms and purifies 400 liters of air per minute. 

Silent and damper controlled via arms. 

Vacuum cleaners and accessories in several different models. 

Technical Data:

Noise level: 46dBA

Height: 61cm

Width: 31cm

Depth: 53cm

Weight: 25kg 

Contact us for more information.

The Ionizing Air Blower is a compact and efficient device designed for static elimination. Operating on a DC working principle, it is small enough to be installed inside equipment while maintaining high performance.
It offers low power consumption, long service life, and is recognized for its safety, reliability, and stable performance.

This ionizing air blower is ideal for applications requiring reliable static control in compact spaces, ensuring safe and efficient operation with minimal noise and energy consumption.

Key Features:

1. Durable Tungsten Needle: The blower comes equipped with a tungsten needle, ensuring extended service life.
2. Adjustable Wind Speed: Users can choose between three wind speed settings: high, medium, and low.
3. External Power Supply: The blower is powered by a dedicated external power adapter for convenience.
4. Compact Design: Its mini style allows it to be easily installed inside devices to eliminate static.
5. Certified Safety: It has CE certification, with electromagnetic protection to ensure safety during operation.

How it Works:

It uses positive and negative synchronous emission electrodes, which generate a corona discharge through high DC voltage. This ionizes air molecules, creating a stream of positive and negative ions.
An axial fan then blows these ions onto the surface of the object, effectively eliminating static electricity.

Technical Specifications:

• Input Voltage: DC12V
• Power: 5.5W
• Working Voltage: ±DC3000-DC5000V
• Ion Emission: Steady-state DC
• Emitter Electrode: Tungsten Alloy
• Discharge Structure: Uncoupled electrical contact
• Discharge Range: 450x300mm (LxW)
• Discharge Speed: ≤ 1.5s (150mm away from the air outlet)
• Ion Balance: -15V to +15V (150mm away from the air outlet)
• Alarm Indicator: Power indicator shows normal operation
• Air Volume: ≤ 48.2 CFM
• Noise Level: ≤ 38.9 dB (measured 1 meter away)
• Ozone Emission: ≤ 0.05 ppm (150mm away)
• Working Conditions: Temperature 0-50°C, Humidity 30-70%RH
• Dimensions: 85x54x112mm (fan body size)
• Shell Material: Aluminum powder-coated
• Included Accessories: U-shaped aluminum mounting brackets, bakelite screw handles
• Power Adapter: Input: AC100-240V 50/60Hz; Output: DC12V 1000mA
• Net Weight: 350g (including brackets and screw handles)
• Gross Weight: 600g
• Certification: CE certified

The Ion Air Gun is a static elimination device designed to neutralize static electricity on various object surfaces. It is a highly efficient tool for providing static protection, combining AC high-voltage technology with a specialized emitting electrode. The device ionizes air, producing both positive and negative ions, which are directed onto the object’s surface using compressed air. This process neutralizes the electrostatic charge, ensuring fast and reliable static dissipation.

Features:

1. Compact and portable design: Easy to handle and operate in various environments.
2. Superior electrical performance: Offers excellent efficiency in eliminating static electricity.
3. Dual functionality: Removes static electricity and surface dust simultaneously.
4. Safe operation: Operates under high voltage with microcurrent, ensuring safety and reliability.

This ion air gun is ideal for industries requiring rapid and effective static elimination, providing both safety and performance in a user-friendly design.

Specification:

• Input voltage: AC 220V/50Hz or 110V/60Hz
• Output voltage: AC 2800V
• Power consumption: 20W
• Optimum working distance: 150mm - 300mm
• Ion balance: ≤ ±15V (compliant with ESD STM3.1-2000; IEC 61340-5-1 standards)
• Discharge speed: ≤ 2 seconds
• Noise level: ≤ 65 dB (measured 150mm from blower)
• Air pressure range: 0.2 - 0.6 MPa
• Working temperature: 0°C - 50°C
• Air connector size: 8mm
• Power cord length: 2.5 meters
• Net weight: 377g (including high-voltage cable)
• Gross weight: 437g
• Dimensions: 150mm (L) x 35mm (W) x 160mm (H)

OBS! Power supply not included! Sold separately, art: 1155-J002

This is an advanced ionizing air fan designed for efficient static elimination over a wide area. Using DC de-static technology and equipped with four fans, it delivers high airflow with five-speed regulation and stable performance. Compared to regular fans, it outputs 1.45 times more air, ensuring faster and more effective static removal. It also features an LCD display for real-time monitoring of key parameters, including ion balance and system status, and offers intelligent control for various industrial applications.

The fan is a highly efficient ionizing fan system designed for wide-range static elimination in industrial settings. With its intelligent control features, network communication capabilities, and reliable performance, it is ideal for applications requiring precise static control over a large area.

Key Features:

1. Touch Control: The light touch switch button allows for easy and fast operation.
2. Multiple Air Outlets: Each outlet features 8 needles, generating a large volume of ions for effective static elimination.
3. Automatic Needle Cleaning: The system automatically cleans the ion needles every 8 hours, eliminating the need for manual cleaning.
4. High Air Volume: The fan offers five-speed regulation with stable performance and 1.45 times the air output of conventional fans.
5. LCD Display: The screen shows vital information such as device address, wind speed, cleaning cycle, ion balance voltage, temperature, humidity, and alarm status.
6. Self-Balancing Ion Function: The ion balance is maintained within ±10V, with real-time monitoring of the balance voltage.
7. Adjustable Ion Output: The positive and negative ion output ratio can be adjusted to fine-tune the ion balance voltage.
8. Alarm System: Any abnormalities in fan function or ion balance trigger alarms via LED indicators and a display prompt.
9. Remote Control: Ion output characteristics can be adjusted remotely, allowing greater control over system operations.
10. Network Communication: The fan can be connected to a wired network, enabling remote monitoring of its working status.
11. Electromagnetic Protection: CE-certified with electromagnetic protection, the fan does not interfere with other devices and is shielded from external interference.
12. Magnetic Mesh Cover: The mesh cover instantly powers off the fan when removed, making cleaning and maintenance simple and safe.

How it Works:

The fan uses a pulsed DC method to alternate between positive and negative high voltage, generating two polar ions at the electrode pins. This method offers higher ion generation efficiency than traditional AC methods, making it effective at both short and long distances. The discharge frequency is adjustable, allowing for extended static elimination range. Additionally, the positive and negative ion output ratio can be adjusted for intelligent control and optimal static elimination.

Technical Specifications:

• Input Voltage: DC 24V (RJ45 interface) / Three-in-one socket (220VAC, 50/60Hz)
• Output Voltage: DC ±4KV → ±6KV
• Power Consumption: 42.5W
• Ion Emission: Pulse DC
• Emitter Electrode: Tungsten alloy
• Discharge Range: 750x1050mm (LxW)
• Air Volume: ≤ 135 CFM per fan (total 4 fans)
• Noise Level: ≤ 58 dBA (measured 1000mm away from the air outlet)
• Ozone Emission: ≤ 0.05 ppm (150mm away from the air outlet)
• Ion Balance: ≤ ±15V
• Discharge Speed: ≤ 2.5s (measured 450mm away from the air outlet)

Status Indicators:

• Power On/Cleaning: Blue light flashes
• Normal Operation: Green light
• Fan Fault Alarm: Red light steady
• Ion Balance Alarm: Red light flashes
• High Voltage Fault Alarm: Red light flashes
• Infrared Debugging/Cleaning Prompt: Blue light flashing

Communication & Signal Output:

• Communication: RS485 interface (115200bps, 8, 1, n, n)
• Signal Output: RS485, open collector circuit: < 50V, 100mA
• Network Interface: Dual RJ45 interface for wired communication

Operating Conditions:

• Temperature: 0°C - 50°C
• Humidity: < 70% RH

Dimensions & Weight:

• Dimensions: 1011x154x70mm (Ionizing Air Blower body size)
• Net Weight: 4.85kg (including power cord and mounting bracket)

Power Adapter:

• Input: AC 100-240V, 50/60Hz
• Output: DC 24V, 2A (dual RJ45 interface)

Installation Accessories:

• 1 pair of L-shaped iron powder-coated mounting brackets
• 1 pair of bakelite screw handles (M5x8)

Certification:

• Certification: CE

High-Resolution 3D Measurement Video Microscope

This microscope combines optical technology with advanced digital imaging capabilities.
The sophisticated instrument offers a transformative approach to magnification and measurement, and is suitable for various industries both in manufacturing and quality control.

■ 2D/3D viewing angle that can be switched manually

■ The three-dimensional elements and recesses can be observed with a 3D lens

■ Clarity remains consistent when switching between different angles, and the central position is maintained, providing 360-degree rotational observation

Save time and optimize workflow.

PSS enables quick, precise PCB changes, ensuring proper positioning for repetitive soldering tasks.

This support adapts perfectly to any type of PCB up to 130 x 130 mm / 5 x 5 in by means of its many adjustable elements.

Features:

• Horizontal-axis swivel

Turn the PCB holder 180º upside down and choose among 4 different angular positions 25º, 35º, 45º and 55º.

• Vertical-axis swivel

Allows positioning the PCB at any angle. It can be rotated in horizontal and inclined position.

• It provides up to 3 heights.

When combined with PHSE Preheater its built-in slots ensure precise board-preheater alignment to always heat the same area.

SPECIFICATIONS

B·IRON NANO features a lightweight and ergonomic tool, providing the highest precision for soldering SMDs.

The short-distance tip-to-grip ensures exceptional control for meticulous tasks and its unprecedented freedom of movement optimizes working under a magnifying glass or in areas away from the workbench.

It performs up to 120 small SMD soldering joints per charge.

Included:

• B·NANO Nano Handle, which is fully compatible with C115 Cartridge Range. It also has a power safe mode that can be activated by putting on the cap.

• BCB Charging-Base for charging the tool automatically when placed in Tool Holder.

It also features Quick Cartridge Exchanger, enabling a safe and easy cartridge change, Tip Cleaner with Brass Wool and Antisplash Membrane.

• PDS Portable Display 7" with B·IRON app to configure and control the system.

ESD Cardigan belongs to the WINTER collection, which is used in winter or in cold manufacturing environments for ESD clothing.

Available sizes: unisex XS - 5XL.

With long zipper and standing collar.

2 side pockets.

ESD symbol on sleeve.

Comfortable, breathable.

Not waterproof, for indoor use.

More ESD fabrics and colors available. 

IEC/TS 61340-4-9:2016 and ANSI/ESD STM2.1:2018 ESD certified products.

ESD Cardigan belongs to the WINTER collection, which is used in winter or in cold manufacturing environments for ESD clothing.

More ESD fabrics and colors available. 

Available sizes: unisex XS - 5XL

With short zipper

2 side pockets

ESD symbol on chest

ESD Cuff

Comfortable, breathable

FABRIC PROPERTIES

Static dissipative woven fabric (carbon loaded yarns in 5 mm grid)

Finish: Crease resists, workwear

Resistance from point to point (Rp): 106 - 107 Ohm

Charging time: < 2 seconds

Electrical propoerties maintained after more then 50 industrial washings according to IEC 61340-5-1 and ANSI / ESD S20.20

Complies with IEC 61340-5-1 and ANSI / ESD S20.20

Developed for industrial washing KK01

Composition: 74% Polyester, 24% Cotton, 2% Conductive fiber

Fabric Weight: 125 g/m2 TH55

Composition: 63% Polyester 33% Cotton 4% Conductive fiber

Fabric Weight: 155 g/m2 TH65

Composition: 36% Polyester 60% Cotton 4% Conductive fiber

Fabric Weight: 160 g/m2 TH96

Composition: 96% Cotton 4% Conductive fiber

Fabric Weight: 125 g/m2 CR10 Composition: 98% Polyester 2% Conductive fiber

Fabric Weight: 96 g/m2 CT35

Composition: 69% Polyester 27% Cotton 4% Conductive fiber

Fabric Weight: 130 g/m2

Static dissipative knitted fabric (with carbon yarn)

Finish: Crease resists, workwear

Resistance from point to point (Rp): 106 - 107 Ohm

Charging time: < 2 seconds

Electrical propoerties maintained after more then 40 industrial washings according to IEC/TS 61340-4-9-2016 and ANSI/ESD STM2.1-2018

Complies with IEC/TS 61340-4-9-2016 and ANSI/ESD STM2.1-2018

Developed for industrial washing

THSS

Composition: 48% Polyester 48% Cotton 4% Conductive fiber

Fabric Weight: 280 g/m2

The first truly hands-free probe! Makes instant measurements or long triggering sessions a breeze.

No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release.

Saves time and frustration during development, verification and repairs.

The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals.

The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool.

The dual pin header connector fits directly on a 2.54mm (0.100”) connector.

The SP10 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition.

INCLUDES:

4× PCBite holder

1× Large Base plate (A4)

4× SP10 probes with pin tipped test needles

4x Extra test needles

1x Set of yellow insulation washers

5x Dupont to dupont test wires 2x Banana to dupont test wires

1x Micro fiber cloth

A complete PCBite kit intended for connection directly to multimeter or power supply.
Kitt comes with 2psc complete SP10 probes with one red and one black probe head (positive and negative) packed together with a set of red/black banana cables.

INCLUDES:

4× PCBite holder 1x Large Base plate (A4)

2x SP10 probes with red/black probe head and pin tipped test needles

2x Banana to dupont test wires red/black

2x Extra test needles

1x Set of yellow insulation washers

1x Micro fiber cloth