För att ge dig bättre service använder vi cookies. Genom att fortsätta på sidan godkänner du vår användning av cookies.

High precision station

Filtrera & sortera Filtrera & sorteraAntal artiklar 8
Antal artiklar 8
Sortera
Compact Precision Sold.St 230V
CD-2SQF

Newly Upgraded!

More intuitive and well-connected

This station is ideal when working on populated PCBs or under a magnifying glass.

It uses the T210-A Precision Purpose Handle, the perfect handpiece for accuracy soldering jobs with medium power requirements.

 

The new F version includes:

• Fast and easy configuration of the station thanks to the 7-key keypad.

Cartridge Holder to store up to four cartridges, as well as Cartridge Extractor and Cable Collector.

• Connectivity to JBC Fume Extractor (connector RJ12).

It provides the best soldering quality thanks to JBC Most Efficient Soldering System and, additionally, the Sleep & Hibernation Modes help to extend the life of tips.

 

1 CD Soldering Station
1 T210-A Precision Purpose Handle
(cartridge not included)
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Connectivity
USB-B
Software PC / Firmware update
Equipotential bonding
Optional connection to EPA
RJ12 Connector
Earthing Fuse
F 1.25A
ESD/EOS
ESD safe
Tip to ground vol./ resist.
Meets and exceed
ANSI/ESD S20.20-2014 IPC J-STD-001F
Power supply
Peak power
40 W - 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Compact Stations
145 x 150 x 175 mm / 2.67 kg.
5.71 x 5.91 x 6.89 in / 5.89 lb.

 

 

Micro Tweezers  Station 230V.
CP-2QF

Newly Upgraded!

More intuitive and well-connected

The best solution for soldering and rework of SMD components such as chips, small/medium SOP components and dual line components.

It uses the AM120-A Adjustable Micro Tweezers for fast and precise SMD rework which requires the highest precision.

The new F version includes:

• Fast and easy configuration of the station thanks to the 7-key keypad.

Cartridge Holder to store up to four cartridges, as well as Cartridge Extractor and Cable Collector.

 

• Connectivity to JBC Fume Extractor (connector RJ12).

 

 

It provides the best soldering quality thanks to JBC Most Efficient Soldering System and, additionally, the Sleep & Hibernation Modes help to extend the life of tips.

 

1 Control Unit
1 AM120-A Adjustable Micro Tweezers
(cartridge not included)
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Connectivity
USB-B
Software PC / Firmware update
Equipotential bonding
Optional connection to EPA
RJ12 Connector
Earthing Fuse
F 1.25A
ESD/EOS
ESD safe
Tip to ground vol./ resist.
Meets and exceed
ANSI/ESD S20.20-2014 IPC J-STD-001F
Power supply
Peak power
80 W - 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Compact Stations
145 x 150 x 175 mm / 2.70 kg.
5.71 x 5.91 x 6.89 in / 5.96 lb.

 

Desoldering St.Elect.Pump 230V
CS-2F

Newly Upgraded!

More intuitive and well-connected

The perfect station for precision desoldering jobs of THT components and SMD pad cleaning.

It uses the DS360-A Micro Desoldering Iron, a microdesoldering iron for thin desoldering jobs of SMD or conventional components. It is capable to provide up to 40 W, if it is required.

 

The new F version includes:

• Fast and easy configuration of the station thanks to the 7-key keypad.

Cartridge Holder to store up to four cartridges, as well as Cartridge Extractor and Cable Collector.

• Connectivity to JBC Fume Extractor (connector RJ12).

It provides the best soldering quality thanks to JBC Most Efficient Soldering System and, additionally, the Sleep & Hibernation Modes help to extend the life of tips.

 

1 CS Control Unit
1 MS-A Electric Desoldering Module
1 DS360-A Micro Desoldering Iron
5 C360002 Through hole desoldering Ø 0.8
5 C360004 Through hole desoldering Ø 1.2
Selectable Temperature
180 to 450 ºC / 360 to 840 ºF
Vacuum
75% / 570 mmHg / 22.4 inHg
Flow rate
9 SLPM
Connectivity
USB-B
Software PC / Firmware update
Equipotential bonding
Optional connection to EPA
RJ12 Connector
Earthing Fuse
F 1.25A
ESD/EOS
ESD safe
Tip to ground vol./ resist.
Meets and exceed
ANSI/ESD S20.20-2014 IPC J-STD-001F
Power supply
Peak power
40 W - 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Compact Stations
145 x 150 x 175 mm / 4.00 kg.
5.71 x 5.91 x 6.89 in / 8.82 lb.

 

Desoldering St.Pneum.Pump 230V
CV-2E
The CS / CV Station is equiped with a Desoldering Module and is ideal for desoldering the smallest plated through hole components and removing solder from surface mount pads.

There are two models, the CS which works with an electric pump and the CV which works with compressed air supply.

This Station comes with the comfortable DS360 Micro Desoldering Iron which uses the JBC exclusive Heating System and the intelligent Sleep & Hibernation features.

As all the Compact Stations, the CS / CV has a menu with more than 10 parameters to customize the control unit.

- 1 CSV Control Unit
Selectable Temperature 180 to 450 ºC / 360 to 840 ºF
Vacuum 90% / 680 mmHg / 26.8 inHg
Flow rate 15 SLPM
CONNECTIVITY
USB-B Software PC / Firmware update
Equipotential bonding Optional connection to EPA
ESD/EOS
ESD safe
Tip to ground resistance <2 ohms
POWER SUPPLY
Peak power 40 W - 23,5 V
Ambient operating temp. 10 to 50 ºC / 50 to 120 ºF
DDE Precision Station 230V
DDPE-2QB

DDPE Precision Rework Station is a perfect solution for fast and precise SMD rework of chip components and small outline ICs.

This rework station comes with the T210 Precision Purpose Handle and the AM120 Adjustable Micro Tweezers. The short distance tip-to-grip of both tools provides the highest precision handling even under microscope.

The Precision Handle T210 work with C210 cartridges and the AM120 with C120 cartridges whose exceptional thinness allows reworking components on heavily populated PCBAs without disturbing nearby components.

 

Selectable Temperature 90 to 450 ºC / 190 to 840 ºF
CONNECTIVITY
USB-B (rear) Software PC / Traceability
USB-A (front) Firmware update Soldering Graphics management
Robot RS-232 remote control or Smart Fume Extractor connection.
Equipotential bonding Optional connection to EPA

 

ESD/EOS
ESD safe
Tip to ground resistance <2 ohms
Tip to ground voltage <2 mV RMS

 

POWER SUPPLY
Peak power 150 W per tool – 23.5 V
Ambient operating temp. 10 to 50 ºC / 50 to 120 ºF
2T DDE Station Pneum.Pump 230V
DDVE-2QC

The DDSE / DDVE station is a complete solution to rework circuits with T245 General Purpose Handle and DR560 Desoldering Iron.

The DDE Control Unit manages up to 2 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.

The Desoldering Module generates the vacuum needed to remove the molten solder from plated through hole and surface mount pads with the DR560. There are two models, the DDSE which works with an electric pump and the DDVE which works with compressed air supply.

It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.

It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.

 

Selectable Temperature 90 to 450 ºC / 190 to 840 ºF
Vacuum 90% / 680 mmHg / 26.8 inHg
Flow rate 15 SLPM
Air pressure supply up to 6 bar
CONNECTIVITY
USB-B (rear) Software PC / Traceability
USB-A (front) Firmware update Soldering Graphics management
Robot RS-232 remote control or Smart Fume Extractor connection.
Equipotential bonding Optional connection to EPA
ESD/EOS
ESD safe
Tip to ground resistance <2 ohms
Tip to ground voltage <2 mV RMS

POWER SUPPLY

Peak power 150 W per tool – 23.5 V
Ambient operating temp. 10 to 50 ºC / 50 to 120 ºF
Nano Soldering Station 230V
NANE-2C

The NANE Station is the best solution for soldering and rework of SMT components requiring the highest precision.

It works with the JBC Most Efficient Soldering System and the intelligent Hibernation mode.

This station comes with two NT115 Nano Handle. The short distance from the tip to the handle offers maximum control even when using a microscope.

The NASE-C Rework Station works with the C115 Cartridge Range.

As all the JBC Stations, the NANE has a menu with more than 10 parameters to customize the control unit.

NANE-9C 100 V
NANE-1C 120 V
NANE-2C 230 V
- 1 NAE Control Unit
Selectable Temperature
90 to 450 ºC
Connectivity
Pedal ( 1 per tool)
Connect a pedal (ref.P-405) to control the tools. It allows using Nano tweezers for soldering.
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update Soldering Graphics management
Robot
RS-232 remote control or Smart Fume Extractor connection.
Equipotential bonding
Optional connection to EPA
ESD/EOS
ESD safe
Tip to ground resistance
< 2 ohms
Tip to ground voltage
< 2 mV RMS
Power supply
Peak power
14 W per tool – 8.5 V
Ambient operating temp.
10 to 50 ºC
Dimensions and weight
Control Unit
170 x 90 x 135 mm / 2,50 kg
Nano Rework Station 230V
NASE-2C

The NASE Station is the best solution for soldering and rework of SMT components requiring the highest precision. Watch video for soldering examples.

It works with the JBC Most Efficient Soldering System and the intelligent Hibernation mode.

This station comes with the NT115-A Nano Handle and the AN115-A Adjustable Nano Tweezers. The short distance from the tip to the handle offers maximum control even when using a microscope.

The NASE-C Rework Station works with the C115 Cartridge Range.

As all the JBC Stations, the NANE has a menu with more than 10 parameters to customize the control unit.

 

NASE-9C
100 V
NASE-1C
120 V
NASE-2C
230 V
Selectable Temperature
90 to 450 ºC
Connectivity
Pedal ( 1 per tool)
Connect a pedal (ref.P-405) to control the tools. It allows using Nano tweezers for soldering.
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update Soldering Graphics management
Robot
RS-232 remote control or Smart Fume Extractor connection.
Equipotential bonding
Optional connection to EPA

ESD/EOS

ESD safe
Tip to ground resistance
< 2 ohms
Tip to ground voltage
< 2 mV RMS

Power supply

Peak power
14 W per tool – 8.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Control Unit
170 x 90 x 135 mm / 2,50 kg

Produkten har lagts i din varukorg Visa varukorgenTill kassan