För att ge dig bättre service använder vi cookies. Genom att fortsätta på sidan godkänner du vår användning av cookies.

Cleaning is an essential process within electronics manufacture and has been used for many years to remove potentially harmful contaminants during PCB manufacture.

Such contaminants include flux, solder and adhesive residues, and other more general contaminants such as dust and debris present from other manufacturing processes.

The purpose of cleaning, specifically within the rapidly expanding electronics industry, is to essentially improve product lifetime by ensuring good surface resistance and by preventing current leakage leading to PCB failure. This developing market sees modern and future electronics becoming smaller and smaller and the requirement for high performance and reliability is stronger than ever. In order to achieve good insulation resistance and ensure adequate adhesion of conformal coatings and encapsulation resins, the cleanliness of the electronic assemblies is essential.

 

Filtrera & sortera Filtrera & sorteraAntal artiklar 17
Antal artiklar 17
Sortera
Visa per sida
Sida 1 av 2
6001

ESD Mat and Table Top Cleaner is a multi-purpose neutral cleaner that is designed for production areas including static control stations. This ESD cleaner allows for effective cleaning with no alkali or ammonia.

Effective Cleaning With No Alkali or Ammonia

ACL Mat & Table Top Cleaner is a multi-purpose neutral cleaner that is designed for production areas including static control stations. It is the ideal cleaner for areas in which static-sensitive devices are assembled, tested, and handled, but can also be used in areas that require a mild but effective cleaner. This non-abrasive formula is safe to use on workstations, table tops and anti-static mats, including rubber and vinyl.

Mat & Table Top Cleaner is a non-flammable cleaner that leaves no film or streaks. It effectively removes flux residues, oily finger-marks, grease, nicotine, dirt, grime and inorganic contaminants. It also removes dirt on chair mats and other antistatic mats without degrading the surface’s antistatic properties.

Key Features:
  • Eliminates unsightly film or other residue that may build up on static-sensitive areas.
  • Maintains original surface resistivity of anti-static mats and workbenches.
  • Cleans, rejuvenates, and extends the life of ESD mats.
  • Designed for cleaning any production area including assembly, testing, and areas where sensitive electronic components are handled.
  • Meets or exceeds Mil 81705 & NFPA 56A with an electrostatic decay time of .1 second according to Federal Test Method 4046.
  • Contains no alkali or ammonia.
  • Contains no chemical on RoHS and REACH SvHC.
  • Leaves no film or streaks.
Ingredient Communication Statement
  • Water (7732-18-5) Solvent.
  • C9-11 Alcohols Ethoxylated (68439-46-3) Surfactant.
  • 4’-tert-Butyl-2’,6’-dimethyl-3’,5’-dinitroacetophenone (81-14-1) Fragrance.
  • Blue Dye.

 

701730

A halide free, clear residue rework gel for the rework of SMT devices, electronic circuits and conventional through hole devices. Exceeds the requirements of J-STD-004 ROL0.

It is a modern "NO CLEAN" flux, that is, in the process of soldering process evaporates without leaving gel residue.

10gr syringes, makes it very easy to dispense.

(automatic / manual)

Can be used as supplied, or with needles/tips for easy application.

Future HF Rework Flux Jelly Flux is also available in tubes for use in machines, enabling it to use larger electronic sites and production facilities.

 

 

705160

Rosin-free wave soldering flux with ultra low residue.

Rosin-free achieves aesthetic finish. JS-EU-01 is made by special preparation which doesn't use rosin at all, realizing a beautiful finish where flux residue after soldering is hardly visible.

Excellent workability even with long dipping

By minimizing outflow of solid content due to the heat and pressure of waving, the rosin-free flux remains active until the end of the process. Realizes amazingly consistent solder workability.

705401

IPA Cleaning Solvent is an approved cleaner which meets standards required by the major electronics manufacturers. The product is designed for use where the application of CFC based solvents is undesirable. IPA will clean thoroughly all electronic equipment and is safe to use on most plastics.

  • Efficient general purpose electronic cleaning solvent
  • Removes contamination from PCBs
  • Excellent plastics compatibility
  • Economic in use
AFC200D

A very efficient anti-static foaming cleanser for surfaces prone to static dust attraction which has been specially developed for use on plastics, metal, glass and synthetic surfaces. This product is free of CFC solvents and propellants. AFC is available in 200 and 400ml 100% Ozone Friendly aerosols.

Ideal for use with anti-static cleaning wipes, preventing against static build up.

  • Protects against static build-up
  • Safe on all plastics
  • Non-flammable
  • Apply and wipe with Anti-Static Cloths
AFC400D

A very efficient anti-static foaming cleanser for surfaces prone to static dust attraction which has been specially developed for use on plastics, metal, glass and synthetic surfaces. This product is free of CFC solvents and propellants. AFC is available in 200 and 400ml 100% Ozone Friendly aerosols.

Ideal for use with anti-static cleaning wipes, preventing against static build up.

  • Protects against static build-up
  • Safe on all plastics
  • Non-flammable
  • Apply and wipe with Anti-Static Cloths
CCL200

Non-flammable safety solvent for use on live equipment. Fast evaporating, leaves no residues and safe on plastics. Removes oxides, grease and dirt. Ensures low contact resistance.

  • Very fast evaporation time
  • Loosens and removes deposits
  • Low hazard product
  • Non-flammable
  • Safe with most plastics and rubbers
FLU400D

FLU Flux Cleaning solvent is a fast-drying solvent flux remover specially formulated for the quick and efficient removal of flux residues after soldering. It can replace ozone depleting solvents such as CFC 113 and exhibits rapid cleaning and fast evaporation rates. The cleaning power of FLU exceeds that of traditional CFC based solvents, easily giving MIL-STD cleanliness.

  • Fast drying solvent cleaner for efficient removal of flux residues after soldering
  • Leaves a perfectly clean, dry surface
  • Harmless to most plastics, rubbers and elastomers
  • Aerosol version available with or without brush applicator
IPA01L

IPA Electronic Cleaning Solvent  is an internationally approved cleaner which meets standards required by the major electronics manufacturers. The product is designed for use where the application of CFC based solvents is undesirable. IPA will clean thoroughly all electronic equipment and is safe to use on most plastics. IPA is 100% Ozone Friendly.

  • Efficient general purpose electronic cleaning solvent
  • Removes contamination from PCBs
  • Excellent plastics compatibility
  • Economic in use
IPA400H

IPA Electronic Cleaning Solvent  is an internationally approved cleaner which meets standards required by the major electronics manufacturers. The product is designed for use where the application of CFC based solvents is undesirable. IPA will clean thoroughly all electronic equipment and is safe to use on most plastics. IPA is 100% Ozone Friendly.

  • Efficient general purpose electronic cleaning solvent
  • Removes contamination from PCBs
  • Excellent plastics compatibility
  • Economic in use
Sida 1 av 2

Produkten har lagts i din varukorg Visa varukorgenTill kassan